background image

12 - 

Appendix

Troubleshooting

Problem

Possible Solution

No picture

1�  Connect power cord correctly�
2�  Turn on power�
3�  Connect signal cable correctly�
4�  Press any button on the LCD TV�

Abnormal colours

Connect signal cable correctly�

Twisted picture

1�  Connect signal cable correctly�
2�  Please use compatible signal�

Picture too dark

Adjust brightness and contrast�

Audio only, no images

1�  Please check if input signal is connected correctly�
2�  TV-RF signal must not be lower than 50dB�

Picture only, no audio

1�  Connect signal cable correctly�
2�  Adjust volume to proper level�
3�  Connect audio signal cable correctly�
4�  TV-RF signal must not be lower than 50dB�

Cannot use remote control

1�  Please change battery�
2�  Turn off power for 10 seconds; and then restart power�

Cannot receive sufficient channels 

through antenna

Please use the Channel Scan function to increase the number of channels not 

included in memory�

No colour

Please adjust the colour setup�

Blinking picture accompanied by ghost 

image

1�  Check the connection of antenna/signal cable�
2�  Check if channel is in play mode�
3�  Press signal source and change input mode�

Broken lines or segments

Adjust antenna�
Keep the TV away from noise sources, such as automobiles, neon lights, and 

hair dryers�

Certain TV channels are blocked (Hope 

to acquire some channels)

Please use the Update Scan method to add the channels not included in 

memory�

Overlapping images or ghost images

Please use multi-directional outdoor antenna�
(If your TV is subject to the influence of nearby mountains or buildings)�

Cannot use a function

If the item you choose turns gray, that item cannot be selected�

Cannot receive programmes

Please use the Update Scan method to add the channels not included in 

memory�

Environmental specifications

Item

32”

42”

46”

50”

*1 On-Mode (W)

Standard

40W

68W

69W

83W

*2 Energy-Save-Mode (W)

Eco > On

32W

54W

55W

67W

*3 Standby-Mode (W)

0�26W

0�28W

0�28W

0�28W

*4  Annual Energy Consumption (kWh)

58kWh

99kWh

101kWh

121kWh

*5 Annual Energy Consumption (kWh) 

    (Energy-Save-Mode)

Eco > On

46�8kWh

79kWh

81kWh

98kWh

 6 Energy Classification

Class A

Class A

Class A

Class A

*1  Measured according to IEC 62087 Ed� 2 / Ed� 3
*2  For further information about the Energy Save function, please see related pages in this operation manual
*3  Measured according to EN 50564: 2011
*4  Annual energy consumption is calculated on the basis of the On-Mode (Standard) power consumption, watching TV 4 

hours a day, 365 days a year

*5  Annual energy consumption is calculated on the basis of the Energy-Save-Mode power consumption, watching TV 4 

hours a day, 365 days a year�

NOTE

•  The power consumption of On-Mode varies depending on the images the TV displays�

Summary of Contents for LC-32LD164E


















Reviews: