21
Basic adjustment settings
Channel memory setting
Perform the following steps after confirming
the type of antenna connection made with
your TV, and the channel type selected in
Step 3.
When viewing ANALOG broadcasts:
1
Press
a
/
b
, and then press
c
/
d
to select
the channel to skip or not.
2
Press
a
/
b
to select “Skip”, and then press
c
/
d
to select “On” or “Off”.
When viewing DIGITAL broadcasts:
1
Press
a
/
b
to select the channel to skip or
not, and then press
c
/
d
to select “On” or
“Off”.
Press
a
/
b
to select ANALOG and DIGITAL
(Air), and then press
ENTER
.
Press
a
/
b
to select “CH Memory”, and then
press
ENTER
.
5
6
• On: Skips channels. (Channel selection disabled using
CH
r
r
r
r
r
/
s
s
s
s
s
.)
• Off: Does not skip channels. (Channel selection enabled
using
CH
r
r
r
r
r
/
s
s
s
s
s
.)
NOTE
• Make sure what kind of connection is made with your TV.
Antenna Setup – DIGITAL
In order to receive digital air broadcasts, you need a
digital broadcast antenna. You can confirm the antenna
configuration through the “Antenna Setup - DIGITAL”
screen.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
1
2
Press
MENU
and the MENU screen displays.
Press
c
/
d
to select “Setup”.
Press
a
/
b
to select “Antenna Setup -
DIGITAL”, and then press
ENTER
.
• If you already set the Secret No., input the 4-
digit secret number here. See page 38 for
setting a secret number.
4
3
Press
a
/
b
to select “Signal Strength”.
• The signal strength of the DIGITAL (Air) antenna
is displayed. The signal information is based
on the current channel.
Press
a
/
b
to select “Channel Strength”, and
then press
ENTER
.
Input the 2-digit channel number to check
the signal strength of the selected channel.
• Make sure the appropriate signal strength of
each channel received is obtained.
Signal Strength
Channel Strength
Signal Strength
Current
Max
0
0
Signal Strength
Current
CH
Max
0
1 2
0
Signal Strength
Channel Strength
Signal Strength
Channel Strength
• The channel signal strength can also be checked
separately.
2
3
1
Repeat steps 1 to 3 in Signal Strength in
Antenna Setup - DIGITAL
4
Press
MENU
and the MENU screen displays.
Press
c
/
d
to select “Setup”.
1
2
3
Press
a
/
b
to select “CH Setup”, and then
press
ENTER
.
• If you already set the Secret No., input the 4-
digit secret number here. See page 38 for
setting a secret number.
LC-37DB5U(E)-19-22
05.8.1, 1:08 PM
21
