28
LC-42LB261U/LC-50LB261U Sharp 42"/50" LED TV
AV (composite video) (good)
1
Make sure that your TV’s power cord is unplugged and the game console is turned off.
2
Connect the video and audio connectors on the game console’s AV cable (not provided) to the
Y/VIDEO
jack and
L
and
R
audio jacks on the back of your TV and to the composite jack(s) on the game console.
3
Plug your TV’s power cord into a power outlet, then turn on your TV.
4
Turn on the game console, then set it to the correct output mode. For more information, see the documentation that
came with the console.
5
Press
INPUT
to open the
INPUT SOURCE
list.
6
Press
S
or
T
to select
AV
, then press
ENTER
.
Notes
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the green
Y/VIDEO
jack.
Important
• Most game consoles come with a special AV cable. See the
documentation that came with your game console or check the
manufacturer’s Web site.
• The
Y/VIDEO
,
P
B
, and
P
R
video jacks (used to connect a component
video device) share the
L
and
R
audio jacks with the
Y/VIDEO
jack (used
to connect an AV device). You can only connect one component video
or AV device at a time. We suggest upgrading to HDMI if your game
console supports it.
• When you connect the audio using the
L
and
R
audio jacks, the audio
output is analog.
Game
console
Console-specific AV cable
Back of TV
AV cable
connector
Analog audio
cable
connectors
AV jack
Analog
audio jacks
On your TV
