background image

In the interests of user-safety (Required by safety regulations in some countries) the set should be restored
to its original condition and only parts identical to those specified should be used.

MODEL

This document has been published to be used for
after sales service only.
The contents are subject to change without notice.

COMBINATION LIQUID CRYSTAL

TELEVISION AND DVD/CD PLAYER

CONTENTS

S68ONLC32DV24

CAUTION .............................................................................................................................
IMPORTANT SAFEGUARDS ..............................................................................................
WHEN REPLACING DVD DECK .........................................................................................
DISC REMOVAL METHOD AT NO POWER SUPPLY ........................................................
PARENTAL CONTROL-RATING .........................................................................................
ABOUT LEAD FREE SOLDER (PbF) ..................................................................................
GENERAL SPECIFICATIONS .............................................................................................
DISASSEMBLY INSTRUCTIONS ........................................................................................
SERVICE MODE LIST .........................................................................................................
SERVICING FIXTURES AND TOOLS .................................................................................
RE-WRITE FOR DVD FIRMWARE ......................................................................................
WHEN REPLACING EEPROM (MEMORY) IC ....................................................................
ELECTRICAL ADJUSTMENTS ...........................................................................................
TROUBLESHOOTING GUIDE .............................................................................................
BLOCK DIAGRAM ...............................................................................................................
PRINTED CIRCUIT BOARDS ..............................................................................................
SCHEMATIC DIAGRAMS ....................................................................................................
WAVEFORMS ......................................................................................................................
MECHANICAL EXPLODED VIEWS ....................................................................................
DVD DECK EXPLODED VIEWS .........................................................................................
REPLACEMENT PARTS LIST .............................................................................................

Page
A1-1
A1-2~A1-4
A1-5
A1-6
A1-6
A1-7
A2-1~A2-7
B1-1~B3-2
C-1
C-2
C-2
C-3
D-1~D-6
E-1~E-9
F-1~F-8
G-1~G-10
H-1~H-52
I-1, I-2
J1-1~J1-4
J2-1
K1-1~K3-8

LC-32DV24U

SERVICE MANUAL

Parts marked with "

" are important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

SHARP CORPORATION

Summary of Contents for LC32DV24U - 31.5" LCD TV




























































































Reviews: