44
MD-DS8
MD-DS8
ENGLISH OPERATION MANUAL
LISTENING TO A GROUP-RECORDED
MINIDISC (pages 24 - 25)
Using MiniDiscs group-recorded with a recorder that
can perform group recording (Sharp's MD studio, MD
portable recorder, etc.), you can select the group of
your favorite album or artist and play it back.
■
Listening to a group-recorded MD
To playback:
Load a group-recorded MD.
Group1
Group2 Group3
Non-group
A
1
B
2
C
3
D
4
E
1
F
2
G
3
H
1
I
2
1
J
3
K
4
L
5
M
1
N
2
Group1
Group2
Group3
Non-group
A
1
B
2
C
3
D
4
E
1
F
2
G
3
H
1
I
2
J
3
K
4
L
5
M
1
N
2
Non-group tracks will
be played at the end.
●
If the auto play mode has been canceled, press
the
button.
CHECKING DISPLAYS (pages 22-23)
■
To check the elapsed playing time and re-
maining playing time
Press the
DISPLAY
button on the remote control re-
peatedly during playback.
Elapsed
playing time
Remaining
playing time
Track name
Disc name
■
To check the total playing time
While playback is stopped, press the
DISPLAY
but-
ton on the remote control repeatedly to select the
total playing time or the disc name.
●
This unit can display katakana characters which
conform to the MD standard specifications.
●
If the track or the disc is not named, “NoNAME”
is displayed.
■
To check the playing time of each track
1. W h i l e p l a y b a c k i s s t o p p e d , p r e s s t h e
or
button on the remote control to select
the track number or track name.
2. Press the
DISPLAY
button on the remote control.
●
Once the playing time is displayed, you can
check the playing time of other tracks simply by
selecting them with the
or
button on
the remote control.
■
To check service life of the battery
When a rechargeable battery or the alkaline battery
is used, its remaining amount is displayed.
As the battery charge drops from use, the bars in
the charge indicator will go out one by one.
●
When the battery is run down, “LoBATT” appears
on the display and the power is turned off.
●
The battery remaining amount may not be
displayed steadily for approximately 20 seconds
after the power is turned on.
●
The remaining amount is not displayed if the unit
is used on the battery charger.
●
The number of bars shown in the battery indicator
may change depending on the operation being
performed.
●
If you use a battery which you stopped charging
halfway, “
” may appear. It does not mean that
the battery is completely charged.
