Error messages
Meaning
Remedy
BATT EMPTY
●
The battery has run down.
●
Charge the rechargeable battery or
replace the alkaline batteries (or use
the AC adaptor for power).
BLANK DISC
●
Nothing is recorded.
●
Replace the disc with a recorded
disc.
Can’t COPY
●
No copy can be made because of
the SCMS copyright system.
●
Record using the analog cable.
Can’t EDIT
●
A track cannot be edited.
●
Change the stop position of the
track and then try editing it.
Can’t REC
●
Recording cannot be performed
correctly due to vibration or shock
in the unit.
●
Re-record or replace it with another
recordable disc.
Can’t WRITE
●
Editing is impossible.
●
Check the number of tracks.
DEFECT
●
The disc is scratched.
●
If the sound you hear is not correct,
try recording again.
●
Replace the disc with another
recordable disc.
Din UNLOCK
●
Poor connection of the digital cable.
●
Connect the digital cable securely.
DISC ERROR
●
The disc is damaged.
●
Reload the disc or replace it.
DISC FULL
●
The disc is out of recording space.
●
Replace it with another recordable
disc.
HOLD
●
The unit is in the safety mode.
●
Return the HOLD switch to its
original position.
LOCKED
LOCK ERROR
●
The EJECT lever was moved
during recording or editing.
●
Turn off the power and remove the
MiniDisc.
NO DISC
●
A disc has not been loaded.
●
Load a disc.
PB DISC
PROTECTED
●
The disc is write protected.
●
You tried to record on a playback-
only disc.
●
Move the write protection knob
back to its original position.
●
Replace it with a recordable disc.
POWER ?
●
Improper power is being supplied.
●
Use one of the specified power
sources.
SORRY
●
Since a track number is currently
being located or written to, the unit
cannot accept your command.
●
Wait and then try the operation
again.
SYSTEM ERR
●
The unit is malfunctioning and will
require service.
●
For service, contact your local
Sharp authorized service center.
TEMP OVER
●
The temperature is too high.
●
Turn off the power, and wait for the
unit to cool.
TOC ERROR
●
A large portion of the disc has been
damaged.
●
Replace it with another recorded
disc.
TOC FULL
●
There is no space left for recording
character information (track names,
disc names, etc.).
●
Replace it with another recordable
disc.
Tr. Protect
●
The track has been protected from
being erased.
●
Edit the track with the device on
which it was recorded.
U TOC ERROR
●
A large portion of the disc has been
damaged.
●
There is an error in the recorded
signal.
●
Replace it with another recorded
disc.
●
Erase all of the signal errors, and
then try recording again.
? DISC
●
A disc which contains data other
than music was played.
●
There is an error in the signal from
the disc.
●
A disc which contains non-music
data cannot be played.
●
Replace it with another recorded
disc.
ERROR MESSAGES
39
MD-MS702
