●
The continuous recording time is for analog inputs when the volume level is set to
“VOL 0”.
●
The continuous play time shows the value when the volume level is set to “VOL 15”.
●
The above values are the standard values when the unit is charged and used at an
ambient temperature of 68˚F (20
°
C).
●
The operating time when using alkaline batteries may be different, depending on the
type and manufacturer of the batteries, and on the operating temperature.
Input sensitivity:
Output level:
Dimensions:
Width: 3-7/16" (87.0 mm)
Height: 1-3/16" (29.4 mm)
Depth: 3-7/32" (81.5 mm)
Weight:
0.49 lbs. (219 g) with rechargeable battery
Input jack:
Line/optical digital, microphone (powered by the main unit)
Output jack:
Headphones (impedance: 19 ohms)/
remote control unit
■
MiniDisc Recorder
Type:
Portable MiniDisc recorder
Signal readout:
Non-contact, 3-beam semi-conductor laser pick-up
Audio channels:
Stereo 2 channels/monaural (long-play mode) 1 channel
Frequency response: 20 – 20,000 Hz (
±
3 dB)
Rotation speed:
Approx. 400 – 900 rpm
Error correction:
ACIRC (Advanced Cross Interleave Reed-Solomon Code)
Coding:
ATRAC (Adaptive TRansformed Acoustic Coding), 24-bit
computed type
Recording method: Magnetic modulation overwrite method
Sampling frequency: 44.1 kHz (32 kHz and 48 kHz signals are converted to
44.1 kHz, and then recorded.)
Wow and flutter:
Unmeasurable (less than
±
0.001% W. peak)
Recording level
Reference input level
Input impedance
MIC H
0.25 mV
10 k ohms
MIC L
2.5 mV
10 k ohms
LINE
100 mV
20 k ohms
Specified
output
Maximum
output level
Load
impedance
Headphones
—
10 mW + 10 mW
32 ohms
LINE
300 mV
(-12dB)
—
50 k ohms
41
MD-MS702