MD-MS701W/MS702
– 3 –
General
Power source:
DC 3.6 V (rechargeable lithium-ion
battery x 1)
DC 5 V (AC adaptor)
DC 3V: Separately available battery
MD-MS701W: AC 110 - 240V, 50/60Hz
MD-MS702: AC 120V , 60Hz
DC 3V: Separately available battery
case, AD-M70BC
(commercially available, "AA"
size, alkaline battery x 2)
DC 4.5V: Separately available car
adaptor, AD-CA20X
(for cars with a 12-24V DC
negative earth electrical
system)
Power consumption:
0.15 A (AC adaptor)
4 W
Output power:
RMS; 20 mW (10 mW + 10mW)
(0.2% T.H.D.)
Charging time:
Approx. 2.5 hours
(When using the AC adaptor included
with the unit)
Battery life:
The continuous recording time is for analogue input when the
volume level is set to "VOL 0".
The continuous play time shows the value when the volume level is
set to "VOL 15".
The above values are the standard values when the unit is charged
and used at an ambient temperature of 20
o
C.
The operating time when using alkaline batteries may be different,
depending on the type and manufacturer of the batteries, and on
the operating temperature.
Input sensitivity:
Output level:
When using the
rechargeable battery (fully
charged) included with the
unit
When using two,
commerically available,
high capacity, "AA" size,
alkaline batteries (in the
separately available battry
case)
When using two, commercially
available, high capacity, "AA"
size batteries with the
rechargeable battery (fully
charged)
Continuous recording:
Approx. 3.5 hours
Continuous recording:
Approx. 4 hours
Continuous recording:
Approx. 7.5 hours
Continuous play:
Approx. 5 hours
Continuous play:
Approx. 8 hours
Continuous play:
Approx. 13 hours
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER TO
THE OPERATION MANUAL.
Dimensions:
Width: 87.0 mm (3-7/16")
Height: 29.4 mm (1-3/16")
Depth: 81.5 mm (3-7/32")
Weight:
MD-MS701W: 216 g (0.48 lbs.) with
rechargeable battery
MD-MS702: 219 g (0.49 lbs.) with
rechargeable battery
Input socket:
Line/optical digital, microphone
(powered by the main unit)
Output socket:
Headphones (impedance: 32
ohms)/remote control unit
MiniDisc Recorder
Type:
Portable MiniDisc recorder
Signal readout:
Non-contact, 3-beam semi-coductor
laser pick-up
Audio channels:
Stereo 2 channels/monaural (long-
play mode) 1 channel
Frequency response:
20 - 20,000 Hz (
±
3 dB)
Rotation speed:
Approx 400 - 900 rpm
Error correction:
ACIRC (Advanced Cross Interleave
Reed-Solomon Code)
Coding:
ATRAC (Adaptive TRansform
Acoustic Coding), 24-bit computed
type
Recording method:
Magnetic modulation overwrite
method
Sampling frequency:
44.1 kHz (32 kHz and 48 kHz
signals are converted to 44/1 kHz,
and then recorded.)
Wow and flutter:
Unmeasurable (less than
±
0.001%
W.peek)
Specifications for this model are subject to change
without prior notice
Headphones
—
10 mW +
32 ohms
10 mW
LINE
300mV
—
50 kohms
(-12dB)
Maximum
output level
Specified
output
SPECIFICATIONS
Recording
Reference input
Input
level
level
impedance
MIC H
0.25 mV
10 k ohms
MIC L
2.5 mV
10 k ohms
LINE
100 mV
20 k ohms
Load
impedance
BATTERY DISPOSAL (MD-MS702 ONLY)
Contains nickel cadmium (or sealed lead) battery. Must be
recycled or disposed of properly. Remove the battery from the
product and contact federal or state environmental agencies
for information on recycling and disposal options.
