MD-MS702MK
– 2 –
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER TO
THE OPERATION MANUAL.
General
Power source:
DC 3.6 V (rechargeable lithium-ion
battery x 1)
DC 5 V (AC adaptor)
AC 120V, 60 Hz
DC 3V: Optionally available battery
case, AD-M70BC
(commercially available, "AA"
size, alkaline battery x 2)
DC 4.5V: Optionally available car adaptor,
AD-CA20X
(for cars with a 12-24V DC
negative earth electrical system)
Power consumption:
7 W (AC adaptor)
Output power:
RMS; 20 mW (10 mW + 10mW)
(0.2% T.H.D.)
Charging time:
Approx. 3.0 hours
(When using the AC adaptor included with
the unit)
Battery life:
The continuous recording time is for analog inputs when the
volume level is set to "VOL 0".
The continuous play time shows the value when the volume level
is set to "VOL 15".
The above values are the standard values when the unit is
charged and used at an ambient temperature of 68
o
F(20
o
C).
The operating time when using alkaline batteries may be different,
depending on the type and manufacturer of the batteries, and on
the operating temperature.
Input sensitivity:
Output level:
Dimensions:
Width: 3-7/16" (87.0 mm)
Height: 1-3/16" (29.4 mm)
Depth: 3-7/32" (81.5 mm)
Weight:
0.50 lbs.(227 g) with rechargeable battery
Input jack:
Line/optical digital, microphone
(powered by the main unit)
Output jack:
Headphones (impedance: 19 ohms)/
remote control unit
MiniDisc Recorder
Type:
Portable MiniDisc recorder
Signal readout:
Non-contact, 3-beam semi-conductor
laser pick-up
Audio channels:
Stereo 2 channels/monaural (long-play
mode) 1 channel
Frequency response:
20 - 20,000 Hz (
±
3 dB)
Rotation speed:
Approx. 400 - 900 rpm
Error correction:
ACIRC (Advanced Cross Interleave Reed-
Solomon Code)
Coding:
ATRAC (Adaptive TRansformed
Acoustic Coding), 24-bit computed type
Recording method:
Magnetic modulation overwrite method
Sampling frequency:
44.1 kHz (32 kHz and 48 kHz signals are
converted to 44.1 kHz, and then recorded.)
Wow and flutter:
Unmeasurable
(less than
±
0.001% W.peak)
SPECIFICATIONS
Specifications for this model are subject to change without
prior notice
Recording
Reference input
Input
level
level
impedance
MIC H
0.25 mV
10 k ohms
MIC L
2.5 mV
10 k ohms
LINE
100 mV
20 k ohms
Headphones
—
10 mW +
32 ohms
10 mW
LINE
300mV
—
50 kohms
(-12dB)
Maximum
output level
Specified
output
Load
impedance
When using the
rechargeable battery (fully
charged) included with the
unit
When using two,
commerically available,
high capacity, "AA" size,
alkaline batteries (in the
optionally available
battery case)
When using two, commercially
available, high capacity, "AA"
size batteries with the
rechargeable battery (fully
charged)
Continuous recording:
Approx. 4.5 hours
Continuous recording:
Approx. 4 hours
Continuous recording:
Approx. 8.5 hours
Continuous play:
Approx. 6.5 hours
Continuous play:
Approx. 8 hours
Continuous play:
Approx. 14.5 hours
BATTERY DISPOSAL (USA ONLY)
Contains nickel cadmium (or sealed lead) battery.Must be
recycled or disposed of properly.Remove the battery from the
product and contact federal or state environmental agencies
for information on recycling and disposal options.
