– 25 –
MD-X60H
5. TEST-PLAY mode
Step 1
Testmode STOP state
[ t s m
e
]
Step 2
Press the CD
MD EDIT button. TEST-PLAY menu
[ T E S T _ P L A Y _ ]
Step 3
Press once the CD STOP button. ADRES setting (Target address initial value is indicated)
[ A D R E S _ 0 0 5 0 ]
Press once the MD PLAY button.
Step 4
Continuous playback (pit section) (A C1 error indication)
[s
c
]
Continuous playback (groove section) (A C1 error indication)
[a
c
]
Step 5
Press once the CD STOP button. (A ADIP error indication)
[a
a
]
Continuous playback (groove section)
Step 6
Press once the MD STOP button. TEST-PLAY menu
[ T E S T _ P L A Y _ ]
Step No.
Setting Method
• If the MD STOP button is pressed while the TEST-PLAY menu is displayed, TEST mode STOP state is set.
• If the MD PLAY button is pressed while the TEST-PLAY menu is displayed, continuous playback is started from the current pickup position.
• Whenever the CD
MD EDIT button is pressed in the address setting mode, the address changes as follows.
0 0 5 0
→
0 3 C 0
→
0 7 0 0
→
0 8 A 0
→
0 0 5 0
→
…………
• Whenever the CD STOP button is pressed in the address setting mode, the digit which is changed with -
/
+ changes as follows.
0 0 5 0
→
0 0 5 0
→
0 0 5 0
→
0 0 5 0
→
…………
• The digit of address which has been specified with -
/
+ and CD STOP button in the address setting mode is set to +01H/-01H.(0~F)
* If the -
/
+ button is held down, the setting changes continuously with 100 ms cycle.
6. TEST-REC mode
Step 1
Testmode STOP state
[ t s m
e
]
Step 2
Press the CD
MD EDIT button. TEST-REC menu
[ T E S T _ R E C _ _ ]
Step 3
Press once the CD STOP button. ADRES setting (indication of address initial value)
[ a 0 0 5 0 _ p w
]
Step 4
Press once the MD PLAY button. While searching, set the search output to "H". To start continuous play,
[ a
p w
]
return it to "L".
Continuous recording
Step 5
Press once the MD STOP button. TEST-REC menu
[ T E S T _ R E C _ _ ]
Step No.
Setting Method
Remarks
Display
• If the MD STOP button is pressed while the TEST-PLAY menu is displayed, TEST mode STOP state is set.
• If the MD PLAY button is pressed while the TEST-REC menu is displayed, continuous record is started from the current pickup position.
• Whenever the CD
MD EDIT button is pressed in the address setting mode, the address changes as follows.
0 0 5 0
→
0 3 C 0
→
0 7 0 0
→
0 8 A 0
→
0 0 5 0
→
…………
• Whenever the CD STOP button is pressed in the address setting mode, the digit which is changed with -
/
+ changes as follows.
0 0 5 0
→
0 0 5 0
→
0 0 5 0
→
0 0 5 0
→
…………
• The digit of address which has been specified with -
/
+ and CD STOP button in the address setting mode is set to +01H/-01H.(0~F)
* If the -
/
+ button is held down, the setting changes continuously with 100 ms cycle.
• Be sure to remove since excessive raising results in breakage of the pickup.
G) ADJUST setting
Step 1
Testmode STOP state
[ t s m
e
]
Step 2
Press the CD PLAY button seven times. [E E P R O M _ S E T]
Step 3
Press once the MD PLAY button. [ _ _ F o c u s _ _ _ ]
Step 4
Press the CD PLAY button six times.
[ A D J U S T _ _ _ ]
Step 5
Press once the MD PLAY button. [ C O K _ _ _ _ _
]
Step 6
Press once the CD PLAY button. [ F A T _ _ _ _ _
]
Step 7
Press once the CD PLAY button. [ T A T _ _ _ _ _
]
Step 8
Press once the CD PLAY button. [ C A T _ _ _ _ _
]
Step 9
Press once the CD PLAY button. [ F A B _ _ _ _ _ _
]
Step 10
Press once the CD PLAY button. [ S T R _ _ _ _ _ _
]
Step 11
Press once the CD PLAY button. [ S F S _ _ _ _ _ _
]
Step 12
Press once the CD PLAY button. [ S T C _ _ _ _ _ _
]
Step No.
Setting Method
Display
•
: Setting value
Remarks
Display
(For comfirmation of the playback ability at the named address.)
With recording mini disk (For comfirmation of the playback ability at the named address.)
