MD-X60H
– 4 –
Specifications for this model are subject to change without
prior notice.
SPECIFICATIONS
MiniDisc recorder section
Type:
MiniDisc recorder
Signal readout:
Non-contact, 3-beam semi-conductor laser
pickup
Audio channel:
Stereo; 2 channels
Monaural; 1 channel
(long-time recording mode)
Frequency response:
20 - 20,000 Hz
Rotation speed:
400 - 900 rpm CLV, Approx
Quantization:
16-bit linear
Filter:
8-times oversampling digital filter
Error correction:
ACIRC (Advanced Cross Interleave Reed-
Solomon Code)
Coding:
ATRAC (Adaptive TRansformed Acoustic
Coding)
Recording method:
Magnetic modulation overwrite method
D/A converter:
1-bit D/A converter
Sampling frequency:
44.1 kHz
Wow and flutter:
Unmeasurable
(less than 0.001% W. peak)
Signal/noise ratio:
95 dB (1 kHz)
Dynamic range:
90 dB (1 kHz)
Compact disc player section
Type:
3-disc multi-play compact disc player
Signal readout:
Non-contact, 3-beam semi-conductor laser
pickup
Rotation speed:
200 - 500 rpm CLV, Approx.
Error correction:
CIRC (Cross Interleave Reed-Solomon
Code)
Quantization:
16-bit linear
D/A converter:
1-bit D/A converter
Filter:
8-times oversampling digital filter
Frequency response:
20 - 20,000 Hz
Signal/noise ratio:
95 dB (1 kHz)
Dynamic range:
90 dB (1 kHz)
Wow and flutter:
Unmeasurable
(less than 0.001% W. peak)
Tuner section
Frequency range:
FM; 87.5 - 108 MHz
AM; 522 - 1,620 kHz
Sensitivity:
FM; 2.5
µ
V (75 ohms unbalanced)
AM; 650
µ
V/m
Cassette deck section
Type:
Compact cassette tape
Frequency response:
50 - 14,000 Hz (Normal tape)
50 - 15,000 Hz (CrO
2
tape)
Motor:
DC motor with electronic governor
×
1
Signal/noise ratio:
50 dB (Recording/Playback, Dolby NR off)
Dolby NR effect; 10 dB (at over 5 kHz)
Bias and erasure
system:
AC
Tape speed:
4.76 cm/sec. (1-7/8 ips.)
Wow and flutter:
Except for U.K.
Except for U.K.
U.K. Only
U.K. Only
0.2 % (DIN 45 511)
Heads:
Record/playback
×
1
Erase
×
1
General
Power source:
AC 230 V, 50 Hz
Power consumption:
97 W
Output power:
PMPO; 340 W (total)
MPO; 170 W (85 W + 85 W)
(DIN 45 324)
RMS; 100 W (50 W + 50 W)
(DIN 45 324)
Input terminals:
MD IN/AUX (Analogue-1); 500 mV/47 kohms
Auxiliary (Analogue-2); 500 mV/47 kohms
Auxiliary (Digital); optical
Output terminals:
Auxiliary; 2.0 V/1 kohm
Headphones; 16 - 50 ohms
(recommended; 32 ohms)
Speakers; 6 ohms
Dimensions:
Width; 240 mm (9-1/2")
Height; 332 mm (13-1/8")
Depth; 325 mm (12-13/16")
Weight:
8.6 kg (19.0 lbs.)
Speaker section
Type:
3-way type [150 mm (6") woofer, 65 mm
(2-1/2") tweeter and super tweeter]
Maximum input power: 100 W
Rated input power:
50 W
Impedance:
6 ohms
Dimensions:
Width; 205 mm (8-1/8")
Height; 332 mm (13-1/8")
Depth; 323 mm (12-3/4")
Weight:
4.2 kg (9.3 lbs.)/each
0.15 % (WRMS)
RMS; 100 W (50 W + 50 W)
(10 % T.H.D.)
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER
TO THE OPERATION MANUAL.
