manualshive.com logo in svg

Sharp MX-2010U, Operation Manual

The Sharp MX-2010U is a versatile multi-function printer that combines high-quality printing, scanning, and copying capabilities. For easy operation and smooth functionality, it comes with a comprehensive Operation Manual available for free download from our website. Discover the full potential of this product with our user-friendly manual.

Share
Download
background image

8-28

TROUBLESHOOTING

Contents

PROBLEMS RELATED TO SCANNING / INTERNET FAX 
OPERATION

SCANNING / INTERNET FAX

PROBLEMS RELATED TO SCANNING / INTERNET FAX OPERATION

• Transmission does not take place. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-28

• An address cannot be specified.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-29

• Mode cannot be selected.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-29

• Auto selection of the colour mode does not take place correctly.. . . . . . . . . . . . . . . . . . . . . . . . . . . .8-29

• The received image file cannot be opened.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-30

• Transmission takes a long time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-30

• A destination is pre-selected. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-30

• Cannot write to USB memory. (When using USB Memory Scan.) . . . . . . . . . . . . . . . . . . . . . . . . . . .8-30

PROBLEMS RELATED TO SCAN RESULTS

• The scanned image is clipped. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-30

• The quality of the scanned image is poor.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-31

• The scanned image is blank.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-31

• The scanned image is upside down or on its side. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-31

• The [COLOUR START] key indicator is not lit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-31

• JPEG was selected for the file type but the file was created as a TIFF file. . . . . . . . . . . . . . . . . . . . .8-31

• The image is too light or too dark. (When using PC Scan.)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-32

PROBLEMS RELATED TO ONE-TOUCH INDIVIDUAL KEYS / GROUP KEYS

• A one-touch individual key or group key cannot be stored.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-32

• A one-touch individual key or group key cannot be edited or deleted. . . . . . . . . . . . . . . . . . . . . . . . .8-32

• If you cannot find the item that you are looking for in the above table of contents, see "

GENERAL PROBLEMS

" (page 

8-37).

• If you are unable to solve a problem using the solutions in this manual, switch off the [POWER] key (

) and the 

main power switch. Wait at least 10 seconds, and then switch on the main power switch and the [POWER] key (

) 

in that order.

When the LINE indicator is lit or the DATA indicator is lit or blinking, do not switch off the main power switch or unplug 
the power plug. This may damage the hard drive or cause the data being stored or received to be lost.

Problem

Point to check

Solution

Transmission does 
not take place.

Did you select the correct destination? 
Is the correct information (e-mail 
address or FTP server information) 
stored for that destination?

Make sure that the correct destination information 
is stored for the destination and that the destination 
is correctly selected.

If delivery by e-mail (Scan to E-mail) is unsuccessful, an 
error message such as "Undelivered Message" may be 
sent to the designated administrator's e-mail address. 
This information may help you determine the cause of 
the problem.

Summary of Contents for MX-2010U

































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MX-2010U

QMS 1660 Operation preview
1660
Brand: QMS Pages: 122
QMS 1660 Reference Manual preview
1660
Brand: QMS Pages: 306
EBS 2500 Installation And First Startup preview
2500
Brand: EBS Pages: 4
NCR 7156 Setup And User Manual preview
7156
Brand: NCR Pages: 38
Canon MG7700 series Getting Started preview
MG7700 series
Brand: Canon Pages: 2
Canon PIXMA TS5300 Series Getting Started preview
PIXMA TS5300 Series
Brand: Canon Pages: 16
Canon Pixma TR7600 Series Getting Started preview
Pixma TR7600 Series
Brand: Canon Pages: 12
Canon PIXMA MX420 Series Network Setup Troubleshooting preview
PIXMA MX420 Series
Brand: Canon Pages: 34
Canon PIXMA MX700 Series Cleaning Manual preview
PIXMA MX700 Series
Brand: Canon Pages: 7
Canon TS9500 Series Getting Started preview
TS9500 Series
Brand: Canon Pages: 44
Canon PIXMA MG3220 series Setup Manual preview
PIXMA MG3220 series
Brand: Canon Pages: 5
Canon iR2016 Series User Manual preview
iR2016 Series
Brand: Canon Pages: 92
Canon PIXMA TS6200 Series Getting Started preview
PIXMA TS6200 Series
Brand: Canon Pages: 100
Canon S830D Quick Start Manual preview
S830D
Brand: Canon Pages: 68
Canon MG6600 Series Manual preview
MG6600 Series
Brand: Canon Pages: 745
Canon SmartBase MPC400 Parts Catalog preview
SmartBase MPC400
Brand: Canon Pages: 76
Canon G4070 Series Getting Started preview
G4070 Series
Brand: Canon Pages: 59
Canon TR4600 Series Getting Started preview
TR4600 Series
Brand: Canon Pages: 40

Brands by name

Popular brands

Load more brands