MX-3610N MX-PNX5A/B/C/D (PUNCH MODULE) 25 – 2
3)
Open the front cover and remove the front inner cover.
C. Punch unit attachment
1)
Remove the dummy punch guide.
2)
Attach the punch unit to the saddle finisher.
Fix the punch unit with the screw which was removed from the
dummy punch guide.
Before installing, remove the dust box.
Check to confirm that the punch guide pin is securely inserted
into the guide pin insertion hole of the finisher.
Check to confirm that the pawl (A) is engaged with the plate
frame.
3)
Connect the harness on the punch unit side with the PWB on
the finisher side.
2
1
1
1
1
2
A
2
2
1
