MX-3610N MX-2010U/2310U/2610N/3110N/3610N (MAIN UNIT) 2 – 3
3)
While pressing the lever, pull out the developing unit to
remove.
4)
Open the cover to remove.
5)
Loading developer to the developing units.
Be sure to shake the bag of developer thoroughly before pour-
ing into the developing unit.
When pouring the developer into the unit, use care to not get
developer in to the drive section.
6)
Attach the cover.
7)
Shake the developing unit several times horizontally and
strongly.
8)
Open the toner shutter of the developing unit and check to
confirm that there is proper amount of developer. If not, per-
form procedure 7) again.
• Check that there is proper amount of developer.
(The stirring screw can be partly seen.)