MX-3610N MX-2010U/2310U/2610N/3110N/3610N (MAIN UNIT) 2 – 7
(2) Tray size setup
1)
Pull out the paper tray.
Gently pull the tray out until it stops.
If paper remains in the tray, remove it.
2)
Adjust the guide plates A and B by squeezing their lock levers
and sliding them to match the vertical and horizontal dimen-
sions of the paper to be loaded.
The guide plates A and B are slidable. Slide each guide plate
while squeezing its lock lever.
E. Specifications setup
Use simulation 26-6 to set the machines destination.
After completion of destination settings, change the set values to
customize the following settings.
3. Image quality check
A. Execution items
Execute the following items.
*1: When a printer option is installed, be sure to execute the above
item.
B. Description
(1) Print engine image distortion adjustment (Manual
adjustment) / OPC drum phase adjustment
(Automatic adjustment) / Color registration
adjustment (Automatic adjustment)
This adjustment performs the print engine image distortion adjust-
ment, the OPC drum phase adjustment, and the color registration
adjustment simultaneously.
1)
Enter SIM50-22 mode.
SIM No
Content
26
6
Used to set the destination.
SIM No
Content
26
3
Used to set the auditor specification mode.
5
Used to set the count mode of the total counter and
the maintenance counter.
18
Used to set YES/NO of the toner save mode (Only
in UK and Japan versions)
* For other destination versions, this setup is
made by the user program.
52
Used to set YES/NO of counting when non-print
paper is passed through each counter.
53
Used to set YES/NO of user calibration permission.
65
Used to set the limit number of sheets for stapling.
A
B
No.
Item
SIM
1
Print engine image distortion adjustment (Manual
adjustment) / OPC drum phase adjustment
(Automatic adjustment) / Color registration
adjustment (Automatic adjustment)
50-22
2
Copy color balance and density check
3
Printer color balance/density check
64-5/67-25
4
*1
Copy/Printer color balance and density adjustment
(Automatic adjustment)
46-74
EXECUTE
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
$872$'-8670(172)5(*,675$7,21 '580326,7,21
12:(;(&87,1*
(;(&87(
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
$872$'-8670(172)5(*,675$7,21 '580326,7,21
35(66>(&(;87(@7267$57
(55257211(5(037<
(;(&87(
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
$872$'-8670(172)5(*,675$7,21 '580326,7,21
0$,1)0$,1568%6.(:3+$6(
&/1*
0/1*
</1*
$//B527$7(/2.
(;(&87(
Adjustment completed
Abnormal end
