MX-3610N Dehumidifying heater 3 – 13
2)
Remove the connector cover.
3)
Attach the edge saddle. Attach the heater harness 2, and pass
it through the edge saddle.
Pass the earth wire through the edge saddle, and fix it with a
screw (M4 x 8).
4)
Attach the connector cover.
5)
Attach the mounting plate.
6)
Attach the clamp to the 1CS drive unit.
Pass the heater harness 2 through the clamp, and attach the
snap band to the 2CS drive unit.
Connect the heater harness and the heater harness 2.
(6) Paper feed tray removal
1)
Pull out the paper feed tray, and lift it to remove.
(7) Tray 2 heater unit attachment
1)
Pass the harness of the heater unit for the tray 2 through the
hole in the frame. Attach the heater unit for the tray 2 to the
frame, and fix it with a screw (M3 x 6).
2
1
1
3
2
1
2
2
2
2
1
2
1