MX-3610N Dehumidifying heater 3 – 18
2)
Attach the upper cabinet.
3)
Close the upper cover.
4)
Insert the paper feed tray.
(7) Connector connection
1)
Remove the connector cover.
2)
Connect the connector, and tighten the screw.
F. Operation check after installation
1)
Turn on the dehumidifier heater switch.
2)
Measure the resistance value between the earth terminal and
the AC terminal (L side), and between the earth terminal and
AC terminal (N side) with the circuit tester, and confirm they
are not short-circuited.
3)
When not using the dehumidifier heater after checking, turn off
the dehumidifier heater switch.
2
1
3
3
2
2
1
1
2