MX-3610N MX-HD10 (HARD DISK EXPANSION KIT) 6 – 2
B. HDD unit attachment
1)
Attach the HDD unit, and fix the screw included in the pack-
age.
2)
Attach the ferrite core to the SATA cable, and connect the con-
nector to the HDD.
3)
Attach the edge saddle to the LSU mother PWB of the frame.
Connect the connector to the MFP control PWB and LSU
mother PWB.
C. Replace the SD card
1)
Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
2)
Backup the SIM adjustment data in the SD card into the HDD.
Enter the SIM56-11 mode, and press [EXECUTE] key and
[YES] key.
When the backup operation is completed, "COMPLETE" is dis-
played. Check to confirm the display.
3)
Turn OFF the operation panel power switch and the main
power switch.
4)
Remove the MFP control PWB unit.
5)
Replace the black SD card (8GB) installed to the MFP control
PWB with the blue SD card (4GB) included in the package.
1
2
2
2
1
2
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
&23<'$7$)5206'72+''
(;(&87(
$5(<28685("
<(6
12
1
1
1
2
2
1
