MX-3610N MX-RP12 (REVERSING SINGLE PASS FEEDER) 16 – 2
2)
Attach the harness guide, and fix the screw (M3 x 6 S-tight)
included in the package. Connect the connector.
Place the harness of the scanner home position sensor at the
back of the guide and the RSPF harness. Check to confirm
that the connector of the scanner home position sensor is
securely connected.
D. Rear upper cabinet attachment
1)
Attach the rear upper cabinet included in the package.
Check to confirm that the wire is not in contact with the har-
ness fixing plate.
If the wire should be in contact with the harness fixing plate
and the upper rear cabinet should be installed under this con-
dition, the wire may be caught between the both parts to be
damaged, causing a short circuit.
1
3
4
2
MHPS harness
RSPF harness
2
2
2
1
1
wire
harness fixing plate
wire
harness fixing plate