Sharp MX-2310U, Start Manual

8

Do not look directly at the light source.

Doing so may damage your eyes.

Do not block the ventilation ports on the machine. Do not install the machine in a location that 
will block the ventilation ports.

Blocking the ventilation ports will cause heat to build up in the machine, creating a risk of fire.

 CAUTION

The fusing unit and paper exit area are hot. When removing a misfeed, 
do not touch the fusing unit and paper exit area. Take care not to burn 
yourself.

When loading paper, removing a misfeed, performing 
maintenance, closing the front and side covers, and inserting 

and removing trays, take care that your fingers are not 

pinched.

The machine includes the document filing function, which stores document image data on the machine’s hard drive. Stored documents can be called up and printed or transmitted as needed. If a hard drive failure occurs, it will no longer 
be possible to call up the stored document data. To prevent the loss of important documents in the unlikely event of a hard drive failure, keep the originals of important documents or store the original data elsewhere.
With the exception of instances provided for by law, Sharp Corporation bears no responsibility for any damages or loss due to the loss of stored document data.

Laser information

Wave length

790 nm ± 10 nm

Pulse times

Normal paper mode (P/S = 104 mm/s) = (5.15 µs ± 0.03 ns) / 7 mm
Heavy paper mode (P/S = 70 mm/s) = (3.83 µs ± 0.03 ns) / 7 mm

Output power

Max 0.405 mW

„

Caution

Use of controls or adjustments or performance of procedures other than those 
specified herein may result in hazardous radiation exposure.

This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition 
2-2007)

„

“BATTERY DISPOSAL”

THIS PRODUCT CONTAINS A LITHIUM PRIMARY MEMORY BACK-UP 
BATTERY THAT MUST BE DISPOSED OF PROPERLY.
PLEASE CONTACT YOUR LOCAL SHARP DEALER OR AUTHORISED SERVICE 
REPRESENTATIVE FOR ASSISTANCE IN DISPOSING OF THIS BATTERY.

Each instruction also covers the optional units used with these products.