MX-2310U MX-2310U (MAIN UNIT) 2 – 2
D. Lock release
(1) Tray rotation plate lock release
1)
Pull out the tray. Turn the fixing material and remove it.
Remove the caution label.
Attach the removed fixing material to the position shown in the
figure for future use.
Close the tray which was pulled out.
(2) Scanner (2/3 mirror unit) lock release
1)
Remove the optical unit fixing screw, and remove the note
label.
2. Installation
When an optional paper feed desk is connected to the machine,
unpack and install the paper feed desk, then unpack the machine.
Place the option desk on the machine securely, and perform the
installing procedures of the machine.
Place the machine on the optional desk firmly and secure.
A. Developer installation
Be careful not to leave fingerprints or oily dirt on the DV roller sur-
face.
1)
Open the front cabinet. Slide the lock to release, and remove
the waste toner box.
2)
Turn the drum cover securing locks (2) to release, and then
raise the drum positioning cove.
2
1
3
1
2
