MX-2310U Dehumidifying heater 3 – 12
6)
Attach the clamp to the 1CS drive unit.
Pass the heater harness 2 through the clamp, and attach the
snap band to the 2CS drive unit.
Connect the heater harness and the heater harness 2.
(6) Paper feed tray removal
1)
Pull out the paper feed tray, and lift it to remove.
(7) Tray 2 heater unit attachment
1)
Pass the harness of the heater unit for the tray 2 through the
hole in the frame. Attach the heater unit for the tray 2 to the
frame, and fix it with a screw (M3 x 6).
2)
Attach the clamp to the frame. Connect the harness of the
heater unit for the tray 2 to the heater harness, and pass it
through the clamp.
3)
Attach the high temperature caution label to the paper feed
tray 2.
(8) Tray 3/4 heater unit attachment
1)
Pass the harness of the heater unit for the tray 3/4 through the
hole in the frame. Attach the heater unit for the tray 2 to the
frame, and fix it with a screw (M3 x 6).
2
1
1
1
2
2
2
2
