manualshive.com logo in svg

Sharp MX-2615N, Operation Manual

The Sharp MX-2615N Operation Manual is available for free download on our website. This comprehensive manual provides step-by-step instructions and guidelines for operating the Sharp MX-2615N, ensuring you get the most out of this high-performance product. Download it now from our website to enhance your user experience.

Share
Download
background image

7-90

SYSTEM SETTINGS

Contents

Letter Size RX Reduce Print

This program is not available in Canada and Philippines.
When a letter-R (8-1/2" x 11"R) size fax is received, this 
setting reduces the fax to A4R size.

Receiving Date & Time Print

Enable this setting to have the date and time of 
reception printed.
Select [Inside the Received Image] or [Outside the 
Received Image] for the position where the date and 
time is printed.
When [Inside the Received Image] is selected, the date 
and time of reception is printed on the received image.
When [Outside the Received Image] is selected, the 
received image is reduced and the date and time of 
reception is printed in the blank area that results.

A3 RX Reduce

When an A3 size fax is received, this function reduces 
the fax to ledger (11" x 17") size.

POP3 Communication Timeout Setting

The duration of time the machine waits until stopping 
reception when a response is not received from the mail 
server (POP3 server) can be set from 30 to 300 seconds 
in increments of 30 seconds.

Reception Check Interval Setting

This is used to specify the interval at which the machine 
automatically checks the mail server (POP3 server) for 
received Internet faxes. The interval can be set from 0 
minutes to 8 hours in increments of 1 minute.
When 0 hours 0 minutes is specified, the machine does 
not automatically check the mail server for received 
Internet faxes.

I-Fax Output Setting

This sets the output tray for received Internet faxes.
The items that appear will vary depending the machine 
configuration.

This setting is used to allow or refuse reception from 
specified addresses/domains.

When this setting is enabled, A4R size faxes are also 
reduced.

[Outside the Received Image] cannot be selected for 
the reception date and time print setting when "

Auto 

Receive Reduce Setting

" (page 7-89) is not enabled.

When this setting is enabled,  ledger (11" x 17") size 
faxes are also reduced.

The machine also checks the mail server (POP3 
server) for received Internet faxes when the main 
power is switched on. (Except when 0 hours 0 minutes 
is specified.)

Allow/Reject Mail or Domain 
Name Setting

Item

Description

Reject 
Reception

Reception from the stored 
address/domain is not allowed.

Allow 
Reception

Reception from the stored 
address/domain is allowed.

All Invalid

Reception from any address and domain 
is allowed, regardless of whether or not 
any addresses or domains have been 
stored.

Add New

Use this to add a new address or domain 
(maximum of 50) from which reception is 
to be rejected or allowed.
Enter the address/domain (maximum of 
64 characters) and touch the [Store] key.
If the first character of the entry is not 
"@", the entry is identified as an address. 
If the first character is "@", the entry is 
identified as a domain. (xxx@xx.xxx.com 
is treated as an address, and 
@xx.xxx.com is treated as a domain.) 
Storing an address specifies only that 
address. Storing a domain specifies all 
addresses that include that domain.

Registered 
address or 
domain list

This shows a list of the stored addresses 
and domains. An address or domain can 
be selected in this screen to delete it from 
the list.

When there are no stored anti junk mail addresses or 
domains, only the [Add New] key can be selected.

Summary of Contents for MX-2615N





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MX-2615N

Canon imagePROGRAF iPF8300S Basic Manual preview
imagePROGRAF iPF8300S
Brand: Canon Pages: 52
Canon i250 Series Specification preview
i250 Series
Brand: Canon Pages: 2
Xante Ilumina Repacking And Shipping Manual preview
Ilumina
Brand: Xante Pages: 6
Xerox Docutech 6100 Planning Manual preview
Docutech 6100
Brand: Xerox Pages: 16
Xerox DocuTech 6155 Specification Sheet preview
DocuTech 6155
Brand: Xerox Pages: 2
Xerox Docutech 6100 Release Note preview
Docutech 6100
Brand: Xerox Pages: 2
Xerox VersaLink B600 User Manual preview
VersaLink B600
Brand: Xerox Pages: 200
Lexmark X295 Service Manual preview
X295
Brand: Lexmark Pages: 500
Konica Minolta bizhub 160 Parts Manual Manual preview
bizhub 160
Brand: Konica Minolta Pages: 35
Nehoc TCA3-SP User Manual – Operating Manual preview
TCA3-SP
Brand: Nehoc Pages: 9
Xerox DocuPrint 180 Quick Reference Card preview
DocuPrint 180
Brand: Xerox Pages: 2
Novexx Solutions LA-BO User Manual preview
LA-BO
Brand: Novexx Solutions Pages: 6
GeBe GPT-4454 User Manual preview
GPT-4454
Brand: GeBe Pages: 25
Sartorius YDP30 Operating Instructions Manual preview
YDP30
Brand: Sartorius Pages: 202
Savin SDC103 Operating Instructions Manual preview
SDC103
Brand: Savin Pages: 90
Panasonic KX-P1131 - KX-P 1131 B/W Dot-matrix Printer Service Manual preview
KX-P1131 - KX-P 1131 B/W Dot-matrix Printer
Brand: Panasonic Pages: 6
Panasonic KX-MC6000 Series Driver Installation Manual preview
KX-MC6000 Series
Brand: Panasonic Pages: 5
Panasonic KX-MB1536CX Specifications preview
KX-MB1536CX
Brand: Panasonic Pages: 4

Brands by name

Popular brands

Load more brands