manualshive.com logo in svg

Sharp MX-6201N Series, User Manual

Introducing the Sharp MX-6201N Series, a cutting-edge multifunction printer delivering exceptional performance. Unlock its full potential with our comprehensive Brochure & Specs manual, available for free download at 88.208.23.73:8080. Discover the remarkable features and maximize your productivity with this user-friendly guide.

Share
Download
background image

88

Disabling of Color Mode

(When a color-related problem has occurred.)
When a color-related problem has occurred and printing 
is not possible, the use of color mode can be temporarily 
prohibited. Black & white printing will still be allowed.

Disabling of Master Machine Mode

This prohibits the use of the machine as a master 
machine for tandem printing.
(Normally this setting is not necessary.)

Disabling of Slave Machine Mode

This prohibits the use of the machine as a slave machine 
for tandem printing.
(Normally this setting is not necessary.)

Copy Function Settings

Disabling Deletion of Job Programs

This is used to prohibit the deletion and changing of copy 
settings stored in job programs.

Disabling of Bypass-Tray in Duplex Copy

This is used to prohibit the use of the bypass tray when 
making two-sided copies.
The bypass tray is often used to feed label sheets, 
transparency film, and other special media for which 
two-sided copying is prohibited. If a sheet of one of these 
special media enters the reversing unit, a misfeed or 
damage to the unit may result. If special media for which 
two-sided copying is prohibited is often used, it is 
recommended that you enable this setting.

Disabling of Auto Paper Selection

This setting is used to disable the Auto Paper Selection 
function.
When this setting is enabled, automatic selection of 
paper that is the same size as the original on the 
document glass or in the automatic document feeder 
does not take place.

Printer Settings

Prohibit Notice Page Printing

This setting is used to disable printing of notice pages.

Prohibit Test Page Printing

This setting is used to disable printing of test pages. 
When this setting is enabled, "Printer Test Page" in the 
system settings cannot be used to print test pages.

Exclude Bypass-Tray from Auto Paper Select

When [Auto] is selected for paper type selection, the 
bypass tray can be excluded from the trays that can be 
selected. This is recommended when special paper is 
often placed in the bypass tray.

Image Send Settings

Other Disabling

Disable Switching of Display Order

This is used to prohibit changes to the order of display 
(search number order, ascending, descending) in the 
address book.
When this setting is enabled, touching a tab on the 
address book screen does not change the order. The 
currently selected display order will be the order that is 
used after the setting is selected.

Disable Scan Function

This is used to disable PC scan and USB memory scan.
When these modes are disabled, they are grayed out 
when the mode is changed in the base screen.

Settings to Disable Registration

Disable Registering Destination from Operation 
Panel

This disables address control from the machine.
Configure the setting for each of the following items:

• Group
• E-mail
• Internet Fax
• Fax

Select All: Select all items.
Clear Checked: Clear all selections.

This function is only for use as an emergency 
measure. Once this setting is enabled, only a service 
technician can cancel the setting. Promptly contact 
your dealer or nearest SHARP service department to 
have a service technician cancel the setting and 
resolve the color-related problem.

Summary of Contents for MX-6201N Series







































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MX-6201N Series

Lexmark Jetprinter Disney Edition Z615 Series Quick Start Manual preview
Jetprinter Disney Edition Z615 Series
Brand: Lexmark Pages: 2
Sagem MF9500 Facsimile Operation Manual preview
MF9500
Brand: Sagem Pages: 83
Xerox Phaser 6300/DN Repacking Manual preview
Phaser 6300/DN
Brand: Xerox Pages: 3
Xerox DocuColor 252 Specifications preview
DocuColor 252
Brand: Xerox Pages: 8
Xerox Versant 3100 Press Security Manual preview
Versant 3100 Press
Brand: Xerox Pages: 45
Konica Minolta bizhub 160 Service Manual preview
bizhub 160
Brand: Konica Minolta Pages: 20
Parkside PGG 15 C2 Translation Of The Original Instructions preview
PGG 15 C2
Brand: Parkside Pages: 104
Xerox Phaser 6700V/DX User Manual preview
Phaser 6700V/DX
Brand: Xerox Pages: 162
Oki C9800hdn Manual De Instalação Do Software preview
C9800hdn
Brand: Oki Pages: 20
A&D AD-8127 Instruction Manual preview
AD-8127
Brand: A&D Pages: 31
Konica Minolta MS6000 MKII User Manual preview
MS6000 MKII
Brand: Konica Minolta Pages: 102
Xerox Nuvera 100 roduction Systems Paper Manual preview
Nuvera 100 roduction Systems
Brand: Xerox Pages: 70
Output Technology LaserMatrix LM2405 Operator'S Manual preview
LaserMatrix LM2405
Brand: Output Technology Pages: 249
Digital Equipment LN15 User Manual preview
LN15
Brand: Digital Equipment Pages: 122
Roland VersaUV LEF2-300 Service Notes preview
VersaUV LEF2-300
Brand: Roland Pages: 264
G&G GG IMAGE P4100 Series User Manual preview
GG IMAGE P4100 Series
Brand: G&G Pages: 102
Epson LQ 590 Setting-Up Manual preview
LQ 590
Brand: Epson Pages: 7
Epson LabelWorks Safety Kit User Manual preview
LabelWorks Safety Kit
Brand: Epson Pages: 42

Brands by name

Popular brands

Load more brands