manualshive.com logo in svg

Sharp MX-C380P, Operation Manual

The Sharp MX-C380P is a high-performance printer that delivers exceptional printing quality and efficiency. Unlock its full potential with the comprehensive Operation Manual, which can be easily accessed and downloaded for free from our website. Discover all the features and optimize your printing experience effortlessly.

Share
Download
background image

1-48

BEFORE USING THE MACHINE

EXTERNAL ACCOUNT APPLICATION

An external account application can be used in "external authentication mode" or "external count mode". When external 
authentication mode is used, the login screen is retrieved from the application when the machine is started. When a job 
ends, a job notification screen is sent to the application to enable counts to be kept for each authenticated user.
When "external count mode" is used, the login screen is not displayed when the machine is started. Only a job result 
notification is sent to the application. User authentication by the external account application cannot be used, however, 
the external account application can be used in combination with the internal account function.

External account application setup

To enable an external account application in the Web pages of the machine, click [Application Settings] in the 
administrator menu frame, and then [External Applications Settings] and [External Accounting Application Settings]. 
Configure settings for the external account application in the screen that appears. The setting change will take effect 
after the machine is restarted. To restart the machine, see "

TURNING THE POWER ON AND OFF

" (page 1-13).

Operation in external account mode

The two modes for using an external account application operate as explained below.

External authentication mode

When the "Enable Authentication by External Server" checkbox is selected in "External Application Setting" in the Web 
page, the machine enters external authentication mode. When the machine is powered on in external authentication 
mode, the machine accesses the external account application and displays the login screen. The login screen also 
appears when the [Call] key is selected to run a job in the job status complete screen. (The login screen does not appear 
if the user has already logged in by the normal method.)
The [JOB STATUS] key can be pressed while the login screen appears to show the job status screen. To return to the 
previous state, press the mode select key.

If login fails

If the login screen fails to appear or the application does not operate correctly, the machine may also stop operating 
correctly. In this event, it is recommended that you quit external account mode from the Web pages of the machine. For 
more information, see [Help] in the Web pages.
To forcibly exit external account mode from the machine's operation panel, follow these steps:
Change "External Application Setting" in the Web page. Restart the machine to make the change take effect. To restart 
the machine, see "

TURNING THE POWER ON AND OFF

" (page 1-13).

External count mode

When only the "External Account Control" setting is enabled in "External Application Setting" in the Web page, the 
machine enters external count mode.
Unlike external authentication mode, when the machine is started in "external count mode", the login screen of the 
external account application is not displayed. Only the job result is sent to the external account application. External 
count mode can be used together with the user control function of the machine. (External count mode can also be used 
when the user control function is disabled.)

• The user control function of the machine cannot be used in external authentication mode. 

However, "User Registration", "User Count Display", "User Count Reset", "User Information Print", and "The Number of 
User Name Displayed Setting" can be used.

• The mode select key cannot be used while the login screen appears.

Summary of Contents for MX-C380P

































































































































































































































































Reviews:

No comments

Related manuals for MX-C380P

BadgePass NXT5000 Quick Start Manual preview
NXT5000
Brand: BadgePass Pages: 2
JCM GEN5 Series Operation And Maintenance Manual preview
GEN5 Series
Brand: JCM Pages: 70
Datamax ST-3210 Quick Start Manual preview
ST-3210
Brand: Datamax Pages: 2
OEC Compact Series Installation Procedure preview
Compact Series
Brand: OEC Pages: 28
BCS 4206 Operating Manual preview
4206
Brand: BCS Pages: 151
FujiFilm C 9070 9065 Quick Reference Notes preview
C 9070 9065
Brand: FujiFilm Pages: 34
Star mC-Print3 MCP31LB How To Connect preview
mC-Print3 MCP31LB
Brand: Star Pages: 12
Citizen iDP-3210 Service Manual preview
iDP-3210
Brand: Citizen Pages: 46
Minolta PagePro 8 Manual preview
PagePro 8
Brand: Minolta Pages: 227
Kyocera Mita Ecosys FS-1800+ Installation Manual preview
Ecosys FS-1800+
Brand: Kyocera Mita Pages: 31
Konica Minolta BIZHUB 195 Start Manual preview
BIZHUB 195
Brand: Konica Minolta Pages: 4
Konica Minolta BIZHUB C3351 Quick Start Manual preview
BIZHUB C3351
Brand: Konica Minolta Pages: 102
Lanier AP3200 Operator'S Manual preview
AP3200
Brand: Lanier Pages: 140
QMS qms-ps 800+ User Manual preview
qms-ps 800+
Brand: QMS Pages: 188
Sinfonia Technology DP-1045 Operation Manual preview
DP-1045
Brand: Sinfonia Technology Pages: 41
Epson XP-220 Network Manual preview
XP-220
Brand: Epson Pages: 35
Epson WorkForce WF-7610 Quick Manual preview
WorkForce WF-7610
Brand: Epson Pages: 16
Epson XP-212 User Manual preview
XP-212
Brand: Epson Pages: 4

Brands by name

Popular brands

Load more brands