7
Contents/Precautions
SH-07E_E_01.fm
[7/11]
Back cover
Battery pack
Desktop holder
SH-07E is waterproof/dustproof, however, do not allow
water or dust to get inside the handset and do not allow
accessories or optional parts to get wet or do not allow dust
to adhere.
The battery pack, adapter, desktop holder and docomo mini UIM card
are not waterproof/dustproof. Do not use in humid or steamy areas
such as bathrooms and avoid exposing to rain and other forms of
moisture. If they are carried close to the skin, perspiration may cause
internal components to corrode and result in malfunction. Note that if
a problem is found to be due to moisture, the handset and parts are
not covered by warranty and in some cases may be irreparable. Even
when repairs are possible, repair charges will be incurred, since the
damage is not covered by warranty.
Clean only with a soft and dry cloth (such as the type used
for eyeglasses).
・
Forceful rubbing of the LCD with a dry cloth may scratch its surface.
・
Note also that LCD coating may stain if moisture or soiling is left on
the surface for a long period.
・
Never use chemicals such as alcohol, thinners, benzene or
detergents, as these agents may erase the printing or cause
discoloration.
Occasionally clean terminals with a dry cotton swab etc.
Dirty terminals may result in poor connections and loss of power or
insufficient battery charge. Keep the terminals clean with a dry cotton
swab etc.
Be careful with the terminals while cleaning them.
Do not place the equipment near an air conditioning vent.
Condensation formed due to rapid changes in temperature may
cause internal corrosion and lead to a malfunction.
Do not apply excessive force to the handset, battery pack,
etc. when using it.
Carrying the handset in a tightly packed bag or sitting on the handset
in your pocket may cause damage to the display, internal
components, battery pack, etc. or result in a malfunction.
Keeping an external connector device plugged into the external
connector terminal or earphone/microphone terminal may cause
damage to the connector or result in a malfunction.
Do not rub or scratch the display with metal etc.
May scratch it and cause malfunction or damage.
Read the respective manuals or user’s guides supplied with
the optional parts carefully.
Do not forcefully press the surface of the touch panel or
operate with a pointed object such as a fingernail, ballpoint
pen or pin.
May damage the touch panel.
Avoid using the handset in extremely high or low
temperatures.
Use the handset within the range of a temperature between 5°C and
35°C and a humidity between 45% and 85%.
Using the handset close to land-line phones, TVs, radios,
etc. may have harmful effects on the operation of such
equipment. Move as far away as possible from such items
before use.
Keep a separate memo noting information stored in the
handset.
DOCOMO shall not be liable for any loss of content.
Do not drop or otherwise subject the handset to severe
impact.
May damage the handset or cause a malfunction.
Surrounding area of earphone/
microphone terminal
ABS resin/UV coating for
surface
Camera panel
PMMA resin
Mobile light
ABS resin
Surrounding area of
out-microphone
Polyurethane
Speaker mesh
PE
Surrounding area of speaker
mesh
PE
Back of display side
PA resin
Back of display side (antenna)
PC resin/UV coating for
surface
Resin section of docomo mini
UIM card/microSD Card slot
ABS resin
Board section of docomo mini
UIM card slot
Glass epoxy board/Gold
plating
Metal section of docomo mini
UIM card slot
SUS/Ni plating
Lever of docomo mini UIM card
slot
Nylon 46
Board section of microSD Card
slot
Glass epoxy board/Gold
plating
Metal section of microSD Card
slot
SUS/Ni plating
Jack sheet
PET
Battery terminal
Copper alloy/Gold plating
Battery storage side
Glass epoxy board/Gold
plating, PET
Resin section of battery storage
side
ABS resin
Gasket of surrounding section of
battery storage side
Silicon rubber
Screw
SUS/EPDM rubber
Part
Material/Surface treatment
Back cover
PC resin/UV coating for
surface
Part
Material/Surface treatment
Battery pack
PC resin/Spark erosion
Battery pack terminal section
Copper alloy/Full surface Ni
with plating base, Gold plating
Part
Material/Surface treatment
Upper side case of main body
ABS
Lower side case of main body
ABS, PLA
Tab
POM
Switch
POM
Charger terminal
C5191W-H/Gold plating,
Sealing treatment
Metal section of connector
terminal
Stainless steel
Screw
SWCH/Black Ni plating
Stopper
PORON
Part
Material/Surface treatment
Handling precautions
General notes
Notes about the handset
SH-07E_E.book 7 ページ 2013年5月10日 金曜日 午後12時16分