Sharp OZ-5600 Operation Manual Download

Page: 162 / 215

159

The DATA DELETION submenu is displayed.

Select ALL TRANSACTIONS and press

ENTER

A confirmation message appears to ask if you are certain
you wish to delete all the transactions.

Press

to confirm or

to cancel the operation.

was pressed, the message “Deleted!” appears briefly

and all transactions are deleted.

Deleting all categories

You can delete all Money Tracking categories if they are
not being used by transactions entries.

Press

, select DATA DELETION and press

ENTER

The DATA DELETION submenu appears.

Select ALL CATEGORIES and press

ENTER

A deletion confirmation message appears.

Press

to proceed with deletion (or

cancel).

All preset and user-defined categories are deleted.

Note that Categories cannot be deleted if they are
currently being used by transaction entries.

Deleting all Money Tracking accounts

This command is used to delete all Money Tracking
accounts and any transactions they contain. If you issue
this command, you will lose all your Money Tracking
information.

Press

, Select DATA DELETION and press

ENTER

The DATA DELETION submenu appears.

Select ALL MONEY TRACKING FILES and press

ENTER

A confirmation message appears asking if you are certain
you want to delete all Money Tracking files (accounts).

Press

to delete or

to cancel the operation.

was pressed, all Money Tracking accounts,

transactions and Categories are deleted.

Summary of Contents for OZ-5600
























































































































































































































Search results

Summary of Contents for OZ-5600

Reviews:

Related manuals for OZ-5600

Brands by name

Popular brands

Sharp OZ-5600, Operation Manual

Search results

Summary of Contents for OZ-5600

Reviews:

Related manuals for OZ-5600

Brands by name

Popular brands