Sharp OZ-5600 Operation Manual Download

Page: 202 / 215

199

Caution:

•

Keep batteries out of the reach of children.

•

Remove batteries from the unit when they become weak

or when the unit will not be used for a long period of

time. Leaving weak batteries in the unit may cause

battery leakage and damage from corrosion.

•

Do not dispose of batteries by fire as they may explode.

Replacing the operating batteries

When using the Organizer, if the

BATT

symbol appears at

the top of the display, the operating batteries should be

replaced as soon as possible. To confirm this, turn the

Organizer off and then on again. If the display shown below

appears, replace both of the operating batteries

immediately.

#Display E-2

Turn off the Organizer.

Set the battery replacement switch on the bottom of

the Organizer to REPLACE BATTERIES (a red dot

will appear).

Slide off the operating batteries cover.

Remove the old batteries by pulling the ribbon tab.

Insert the two new batteries on top of the ribbon tab,

taking care to position them correctly according to the

plus (+) and minus (–) terminals, as shown below.

Replace the cover.

Set the battery replacement switch to NORMAL

OPERATION.

Summary of Contents for OZ-5600
























































































































































































































Search results

Summary of Contents for OZ-5600

Reviews:

Related manuals for OZ-5600

Brands by name

Popular brands

Sharp OZ-5600, Operation Manual

Search results

Summary of Contents for OZ-5600

Reviews:

Related manuals for OZ-5600

Brands by name

Popular brands