Sharp OZ-5600 Operation Manual Download

Page: 95 / 215

Type in any word that you think appears in the
DESCRIPTION field of the anniversary entry you are
looking for.

Press

ENTER

If you still do not see the desired entry, press

display the following matching entries.

Press

ENTER

when you have selected the desired

entry.

☞

This function does not distinguish between upper- and
lower-case letters.

Editing Ann entries

Select the file in which the desired entry is stored.

Select the entry in Index mode.

Press

EDIT

to open Edit mode.

Make the desired changes.

Press

ENTER

The new, correct entry is now stored.

Deleting Ann entries

Deleting single entries

Highlight the entry in Index mode or display it in View
mode.

Press

and select DATA DELETION.

A submenu opens.

Select SELECTED ENTRY, then press

ENTER

A confirmation message will appear asking if you are sure
you want to delete the entry.

Press

(or

to cancel the deletion).

In Index mode, you can also delete single entries by
pressing

DEL

after selecting the entry to be deleted.

Deleting all entries

Press

, select DATA DELETION, then press

ENTER

A submenu appears.

Select ALL ANN 1 BY DATE or ALL ANN 2 BY DAY
as required, then press

ENTER

A confirmation message appears asking if you are sure you
want to delete all entries in the file.

Press

(or

to cancel the deletion).

You can also delete all entries in both ANN files at
once. Simply select ALL ANN FILES in step 2 above.

☞

It is not possible to delete all entries simultaneously if
the unit is locked. See p.186.

Summary of Contents for OZ-5600
























































































































































































































Search results

Summary of Contents for OZ-5600

Reviews:

Related manuals for OZ-5600

Brands by name

Popular brands

Sharp OZ-5600, Operation Manual

Search results

Summary of Contents for OZ-5600

Reviews:

Related manuals for OZ-5600

Brands by name

Popular brands