4-3
4
PC Card
Your computer is equipped with a PC card (PCMCIA) slot, which can accommodate
one Type II card. Before inserting a PC card into your computer, refer to its manual.
When using a PC card which needs an IRQ, disable one of the following ports:
Serial, IR, LPT, or LAN. Otherwise a PC card or the computer may malfunction.
Never disable the USB port. Disabling the USB port in the Setup Utility
may cause some PC cards to malfunction.
Inserting PC Card
1.
Raise the PC card eject button and push it in. The protection card pops out.
2.
Remove the protection card from the PC card slot.
3.
Insert the card into the slot with the label face up until it locks into place. (You
do not have to power down the computer to insert/remove PC cards when using
Windows 98). The PC card eject button pops out. When the PC card is fully
inserted, fold down the PC card eject button.