45
Useful
Featur
es
Signal Adjustment (“SIG-ADJ” Menu)
Menu operation
n
Page
40
0
0
0
0
Phase
Clock
H-Pos
V-Pos
Reset
Auto
1024 x 768
0 IRE
Resolution
Signal Type
Video Setup
Auto
Video System
Signal Info 1024 x 768
H
48.3
kHz
/ V
60.0 Hz
SEL./ADJ.
ENTER
END
Pict.
SIG-ADJ
SCR
PRJ1
PRJ2
Net.
1
3
4
5
6
2
1
Adjusting the Computer Image
If the optimum image cannot be obtained with
Auto Sync adjustment, use the SIG-ADJ function.
Selectable
items
Description
Clock
Adjusts vertical noise.
Phase
Adjusts horizontal noise (similar to
tracking on your VCR).
H-Pos
Centers the on-screen image by
moving it to the left or right.
V-Pos
Centers the on-screen image by
moving it up or down.
To reset all adjustment items, select “Reset”
and press
ENTER
.
The adjustable range of “H-Pos” (H-Position)
and “V-Pos” (V-Position) may vary depending
on the screen resolution of the computer.
•
•
Note
2
Resolution Setting
Ordinarily, the type of input signal is detected and
the correct Resolution mode is automatically
selected. However, for some signals, the optimal
Resolution mode in “Resolution” may need to be
selected to match the computer display mode.
See “Checking the Input Signal” on page
46
for information on the currently selected input
signal.
•
Note
3
Signal Type Setting
This function allows you to select the input signal
type RGB or Component for COMPUTER/
COMPONENT 1 or 2.
Selectable
items
Description
Auto
Input signals are automatically
recognized as RGB or component.
RGB
Set when RGB signals are received.
YPbPr
Set when Component signals are
received.
Summary of Contents for PG-D2710X
Page 75: ......
