REMOVE OF MOTOR ASS’Y
1. Remove the grille ass’y in accordance with “REMOVE OF GRILLE ASS’Y”.
2. Remove the hard board and remove closed terminal and cut 3 lead wires from the piano switch ass’y.
3. Remove 3 screws holding the motor bracket.
4. Pull the clutch knob from the motor ass’y and remove the motor cover.
5. Remove screw holding the motor cover.
6. Remove 2 screws holding the link rod to the motor ass’y.
7. Detach the screw holding the motor ass’y to the hinge ass’y and turning axle.
8. Now the motor ass’y is free.
6
Screw
Motor cover
Motor ass’y
Motor bracket
Screw
Turning axle
Link rod
Knuckle shaft
Screw
Hinge
Clutch knob
Screw
REMOVE OF PIANO SWITCH ASS’Y
1. Remove the hard board.
2. Cut 4 lead wires from the piano switch ass’y.
3. Remove 2 screws holding to the piano switch ass’y.
4. Remove the piano switch ass’y from the body, detach the knob switch, spring and remove the insulation sheet
from piano switch ass’y.
5. Now the piano switch ass’y is free.
Screw
Piano switch ass’y
Insulation sheet
Knob switch
Spring
Body
Piano switch ass’y
Insulation sheet
White lead wire
Yellow lead wire
Red lead wire
Closed terminal
Cord band
Power cord
Body
Gray lead wire
Motor lead wire
Fig. 3
Fig. 4
Summary of Contents for PJ-TA161
Page 4: ...4 WIRING DIAGRAM CIRCUIT DIAGRAM GEAR BOX MOTOR ASS Y ...
Page 10: ...10 ...