Sharp Plasmacluster IG-CH2J, Operation Manual

ENGLISH

E-9

FILTER

If the FILTER CLEAN light is (orange) 

Even if the FILTER CLEAN light (orange) does not light, it is recommended to 

carry out the cleaning once a week.

Remove the fi lter.

The fi lter is attached to the rear of 

the main unit.

Clip the tabs on both sides of the 

fi lter and pull it out.

1

Clean up the fi lter.

Gently remove the dust attached to the 

fi lter with a vacuum cleaner.

2

Do  not  press  the  filter  with  force  with  a 

vacuum cleaner. Otherwise, it is damaged.

<For Stubborn Dirt>

Remove and rinse in water. (Use a soft sponge if the dirt does not come off 

easily.) And dry it at the sun shadow place.

Set the fi lter on the main unit.

Press the ON/OFF button 

for 3 seconds.

Insert the fi lter until the stopper of tab is inserted into the main unit 

fi rmly.

3

4

Do not operate the product while the fi lter is removed.

The dust comes in the main unit and it may cause a failure.

2

1

1

Tabs

Filter

Stopper

Filter

ON/OFF 

button

The FILTER CLEAN light flashes twice and 

go off. Even if the FILTER CLEAN light is 

off, press ON�OFF button for 3 seconds after 

cleaning.

IG-CH2J.EN_A515.indd   11

11.11.11   5:14:04 PM