22
E
Switching the screen size (When the input mode is COMPONENT/VIDEO)
Even when the screen size is changed, the display may remain the same depending on the input signal.
WIDE
ZOOM 1
ZOOM 2
DotbyDot
NORMAL
Displays the entire image of the
aspect ratio of 4:3 without
changing the aspect ratio.
An image with a 4:3 aspect
ratio is stretched to fill the
entire screen.
Use this size if ZOOM 1 cuts
off the subtitles.
An image with a 4:3 aspect
ratio is enlarged to fill the
entire screen without changing
the aspect ratio. The edges of
the image may be cut off.
Displays the dots of the input
signals as the corresponding
dots on the screen.*
* If “DotbyDot” is selected in the conditions below, the image quality cannot be changed by
adjusting the value of “SHARPNESS” from the VIDEO ADJUSTMENT menu.
· When the input mode is VIDEO
· When the input mode is COMPONENT and images of 480i or 480p are displayed
TIPS
• Using this monitor’s screen-size switching or dual-screen display functions to compress or expand the screen for
commercial or public viewing in establishments like cafes or hotels may infringe on the rights of the creators, as
protected by Copyright Law, so please be careful.
• When “Enlarge” is set, the screen size is fi xed to “WIDE” mode.
• When dual-screen display is selected, the screen size cannot be changed.
• When using the screen-size switching function of this monitor, the appearance of the original video may change if
you select a screen size with a different aspect ratio than the original image (e.g. TV broadcast or video input from
external equipment). Please consider this point when selecting the screen size.
• When an ordinary non-wide image (4:3) is viewed with the whole screen using the screen-size switching function
of this monitor, the edge of the image may be lost or appear distorted. If you wish to respect the creator’s
intentions, set the screen size to “NORMAL”.
• When playing commercial software, parts of the image (like subtitles) may be cropped. In this case select the
optimal screen size using the screen-size switching function of this monitor. With some software, there may
be noise or distortion at the edges of the screen. This is due to the characteristics of the software, and is not a
malfunction.
• Depending on the original image size (e.g. CinemaScope size), black bands may remain at the edges of the
screen.
Basic Operation
