background image

8

E

MOUNTING PRECAUTIONS

•  This product is for indoor use.

•  A mounting bracket compliant with VESA specifications is 

required.

•  Since the monitor is heavy, consult your dealer before 

installing, removing or moving the monitor.

•  Mounting the monitor on the wall requires special expertise 

and the work must be performed by an authorized SHARP 

dealer. You should never attempt to perform any of this 

work yourself. Our company will bear no responsibility 

for accidents or injuries caused by improper mounting or 

mishandling.

•  Use the monitor with the surface perpendicular to a level 

surface.

•  When moving the monitor, be sure to hold the handles or 

the parts marked by 

 below. Do not grasp the screen 

or tray. This may cause product damage, failure, or injury.

[PN-C861H]

[PN-C751H]

•  This monitor should be used at an ambient temperature 

between 41°F (5°C) and 95°F (35°C). Provide enough 

space around the monitor to prevent heat from 

accumulating inside.

 

Unit: inch [mm]

7-7/8 [200]

2 [50]

2

[50]

2

[50]

1-7/16 [35]

•  If it is difficult to provide sufficient space for any reason 

such as the installation of the monitor inside a housing or 

of several units side-by-side, or if the ambient temperature 

may be outside of the range of 41°F (5°C) to 95°F (35°C), 

install a fan or take other measures to keep the ambient 

temperature within the required range.

•  Temperature condition may change when using the monitor 

together with the optional equipments recommended by 

SHARP. In such cases, please check the temperature 

condition specified by the optional equipments.

•  Do not block any ventilation openings. If the temperature 

inside the monitor rises, this could lead to a malfunction.

•  Do not place the monitor on a device which generates heat.

•  Do not use the product in locations where the unit is 

exposed to direct sunlight or other strong light. Since this 

product operates with infrared rays, such light may cause a 

malfunction.

•  When using multiple monitors closely, be sure the infrared 

transmitter/receiver does not affect the other ones.

Summary of Contents for PN-C751H

















Reviews: