background image

2

E

SAFETY PRECAUTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly 

handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can 

result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, 

operating and cleaning the product. To ensure your safety and prolong the service life of your LCD product, please read the 

following precautions carefully before using the product.

  1.  Read instructions — All operating instructions must be read and understood before the product is operated.
  2.   Keep this manual in a safe place — These safety and operating instructions must be kept in a safe place for future 

reference.

  3.  Observe warnings — All warnings on the product and in the instructions must be observed closely.

  4.  Follow instructions — All operating instructions must be followed.

  5.   Cleaning — Unplug the power cord from the power outlet before cleaning the product. Use a dry cloth to clean the product. 

Do not use liquid cleaners or aerosol cleaners. Do not use dirty cloths. Doing so may damage the product.

  6.   Attachments — Do not use attachments not recommended by the manufacturer. Use of inadequate attachments can result 

in accidents.

  7.   Water and moisture — Do not use the product near water. Do not install the product in a place where water may splash onto 

it. Be careful of equipment which drains water such as an air-conditioner.

  8.  Ventilation — The vents and other openings in the cabinet are designed for ventilation.

     Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life 

of the product. Do not place the product on a sofa, rug or other similar surface, since they can block ventilation openings. 

Do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the 

manufacturer’s instructions are followed.

  9.   Power cord protection — The power cords must be routed properly to prevent people from stepping on them or objects from 

resting on them.

 10.   The screen used in this product is made of glass. Therefore, it can break when the product is dropped or applied with 

impact. Be careful not to be injured by broken glass pieces in case the screen breaks.

 11.  Overloading — Do not overload power outlets or extension cords. Overloading can cause fire or electric shock.

 12.   Entering of objects and liquids — Never insert an object into the product through vents or openings. High voltage flows in 

the product, and inserting an object can cause electric shock and/or short internal parts.

    For the same reason, do not spill water or liquid on the product.

 13.   Servicing — Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other 

dangerous conditions. Request a qualified service person to perform servicing.

 14.   Repair — If any of the following conditions occurs, unplug the power cord from the power outlet, and request a qualified 

service person to perform repairs. 

a.  When the power cord or plug is damaged. 

b.  When a liquid was spilled on the product or when objects have fallen into the product. 

c.  When the product has been exposed to rain or water. 

d.  When the product does not operate properly as described in the operating instructions. 

   Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls 

not described in the instructions can cause damage, which often requires extensive adjustment work by a qualified 

technician.

    e.  When the product has been dropped or damaged. 

    f.   When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the product 

needs servicing.

15.   Replacement parts — In case the product needs replacement parts, make sure that the service person uses replacement 

parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of 

unauthorized parts can result in fire, electric shock and/or other danger.

 16.   Safety checks — Upon completion of service or repair work, request the service technician to perform safety checks to 

ensure that the product is in proper operating condition.

 17.   Wall mounting — When mounting the product on a wall, be sure to install the product according to the method 

recommended by the manufacturer.

 18.   Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating 

products (including amplifiers).

 19.   Batteries — Incorrect use of batteries may cause the batteries to burst or ignite. A leaky battery may corrode the equipment, 

dirty your hands or spoil your clothing. In order to avoid these problems, make sure to observe the precautions below:

    • Use the specified batteries only.

    • Install the batteries with due attention to the plus (+) and minus (-) sides of the batteries according to the instructions in the 

compartment.

    • Do not mix old and new batteries.

    • Do not mix batteries of different types. Voltage specifications of batteries of the same shape may vary.

    • Replace an exhausted battery with a new one promptly.

    • If you will not use the remote control for a long time, remove the batteries.

    • If leaked battery fluid gets on your skin or clothing, rinse immediately and thoroughly. If it gets into your eye, bathe your 

eye well rather than rubbing and seek medical treatment immediately. Leaked battery fluid that gets into your eye or your 

clothing may cause a skin irritation or damage your eye.

 20.   Usage of the monitor must not be accompanied by fatal risks or dangers that, could lead directly to death, personal injury, 

severe physical damage or other loss, including nuclear reaction control in nuclear facility, medical life support system, and 

missile launch control in a weapon system.

Summary of Contents for PN-L651H





































Reviews: