Sharp PN-L651H, Setup Manual

4

E

MOUNTING PRECAUTIONS

•  This product is for use indoors.

•  A mounting bracket compliant with VESA specifications is 

required.

•  Since the monitor is heavy, consult your dealer before 

installing, removing or moving the monitor.

• 

Mounting the monitor on the wall requires special expertise 

and the work must be performed by an authorized SHARP 

dealer. You should never attempt to perform any of this work 

yourself. Our company will bear no responsibility for accidents 

or injuries caused by improper mounting or mishandling.

•  Use the monitor with the surface perpendicular to a level 

surface. If necessary, the monitor may be tilted up to 20 

degrees upward.

• 

When using PN-L851H tilted upward from the perpendicular 

in relation to a level surface, consult an authorized SHARP 

dealer because there are some specific mounting conditions.

•  When moving the monitor, be sure to hold the handles or 

the parts marked by 

 below. Do not grasp the screen 

or tray. This may cause product damage, failure, or injury.

• 

This monitor should be used at an ambient temperature 

between 41°F (5°C) and 95°F (35°C). Provide enough space 

around the monitor to prevent heat from accumulating inside.

For the monitor in landscape orientation

Unit: inch [mm]

Unit: inch [mm]

For the monitor in portrait orientation

7-7/8 [200]

2 [50]

2

[50]

2

[50]

1-7/16 [35]

1-7/16 [35]

2 [50]

7-7/8 [200]

2

[50]

2

[50]

Power LED

•  If it is difficult to provide sufficient space for any reason 

such as the installation of the monitor inside a housing or 

of several units side-by-side, or if the ambient temperature 

may be outside of the range of 41°F (5°C) to 95°F (35°C), 

install a fan or take other measures to keep the ambient 

temperature within the required range.

•  When installing two or more monitor units side-by-side, 

provide space of at least 3/16 inch (5 mm) around them 

to prevent stress on the adjacent unit or structure due to 

thermal expansion.

•  Temperature condition may change when using the monitor 

together with the optional equipments recommended by 

SHARP. In such cases, please check the temperature 

condition specified by the optional equipments.

•  Do not block any ventilation openings. If the temperature 

inside the monitor rises, this could lead to a malfunction.

•  Do not place the monitor on a device which generates heat.

•  Do not use the product in locations where the unit is 

exposed to direct sunlight or other strong light. Since this 

product operates with infrared rays, such light may cause a 

malfunction.

•  When using multiple monitors closely, be sure the infrared 

transmitter/receiver does not affect the other ones.

•  Adhere to the following when installing the monitor in its 

portrait orientation. Failing to adhere to the following may 

cause malfunctions. 

-   Install the monitor such that the power LED is located on 

the bottom side.

-    Set the PORTRAIT/LANDSCAPE INSTALL in the MONITOR 

menu to PORTRAIT. (See OPERATION MANUAL.)

-   Be sure to clamp the power cord (supplied) onto the cable 

clamp attachment using the supplied cable clamp. When 

clamping the power cord, take care not to stress the 

terminal of the power cord. Do not bend the power cord 

excessively.

Power cord (Supplied)

Cable clamp

Cable clamp 

attachment

•  Use the supplied vertical sticker when you install the 

monitor in portrait orientation.

Cover SHARP logo

Logo