32
Program Editor
4. Set [Frame Layout].
1) Check the checkboxes beside the frames, scroll
messages, or PIP that you want to display.
You can also click the
button at the top right
hand corner of a frame or scroll message to hide it.
2) Set “X ”, “Y ”, “Width”, and “Height” coordinates for each
frame or scroll message.
• Only “X ” and “Y ” coordinates can be adjusted for
the PIP frame. To adjust the size of the PIP frame,
click the [PinP] tab, and specify a “Value” for the
“Size” under “Key”.
• Click on a frame or a scroll message to select it.
Eight resize handles will appear around the border
of the frame. By dragging these handles with the
mouse, you can resize a frame or scroll message,
and confirm changes visually.
The frame and scroll messages can be moved by
dragging an area other than the resize handle using
the mouse.
· Dragging while holding down [Shift] allows you to resize a frame while keeping the same aspect
ratio.
· You can also move frames or scroll messages using the arrow keys.
·
You will still be able to adjust the size of a frame if you hold down [Shift] while using the arrow keys.
• You can move or resize items accurately by aligning them with the grid. (
F
p.33)
E.g.
Frame1:
X = 25,
Y = 20,
Width = 1338,
Height = 835
Frame2:
X = 1380,
Y = 25,
Width = 523,
Height = 830
Message1: X = 20,
Y = 869,
Width = 1883,
Height = 194
PIP:
X = 576,
Y = 395
The above coordinates would produce a layout like the screenshot below.
• The name, position and dimensions
(X coordinate of top left corner,
Ycoordinate of top left corner, width,
height) are displayed in the top left of
each frame or scroll message.
• The PIP frame cannot be moved in 1 pt
increments. Locations where items can
be positioned depend on the kind of
LCD monitor used.
Creating programs
