– 4 –
•
A maximum of 4 digits can be stored (decimal point is
not counted as a digit).
Note:
•
Be sure to set this selector to the “
•
” position after storing an
each rate.
•
Only one rate can be stored. If you enter a new rate, the previous
rate will be cleared.
ADD MODE SELECTOR:
“A/+” position –
Effective only in addition and subtraction:
Use of the A/+ mode permits addition and subtraction of
numbers without an entry of the decimal point. When the
A/+ mode is activated, the decimal point is automatically
positioned according to the decimal selector setting.
EXAMPLES: Set A/+-
•
-A/x to A/+
A. Set decimal to 2
Enter
123456
Tape prints
1,234.56 +
B. Set decimal to 3
Enter
123456
Tape prints
123.456 +
Use of the
,
, and
keys will automatically override
the Add mode and decimally correct answers will be
printed at the preset decimal position.
EXAMPLES: Set A/+-
•
-A/x to A/+, 5/4
A. Set decimal to 2
Enter
.1234
Tape prints
0.1234
×
100
100. =
12.34
B. Set decimal to 3
Enter
2
Tape prints
2.
÷
3
3. =
0.667
C. Set decimal to 2
Enter
123
Tape prints
1.23 +
10
10.00 +
11.23
Note that decimal point was entered.
“A/x” position –
Multiplication and division:
When the A/x mode is activated, the number entered
before
or
key will override the add mode. But the
➝
