E-14
ENGLISH
8
QT-UH4H
USB Memory Playback
Notes:
This unit only supports "MPEG-1 Audio Layer-3" format.
(Sampling Frequency is 32, 44.1, 48kHz)
"MPEG-2 Audio Layer-3", "MPEG-2.5 Audio Layer-3" and MP1,
MP2 format are not supported.
Playback order for MP3 files may differ sometimes depending on
the writing software used during file download.
Bitrate which is supported by MP3 is 32~320 kbps, WMA is
64~160 kbps.
For MP3/WMA files, please put ".MP3" ".WMA" extension. Files
cannot be played back if there is no MP3/WMA extension.
Playlists are not supported on this unit.
Copyright protected WMA files cannot be played back.
Programmed play
You can choose up to 32 selections for playback in the order you like.
To cancel the programmed play mode:
Whilst in the stop mode and the "MEMORY" indicator is lit, press the
STOP button. The "MEMORY" indicator will disappear and all the
programmed contents will be cleared.
Notes:
During programme operation, random play is not possible.
After change the function from USB to other function, the
programmed contents will be cleared.
Folder programme is not possible.
1
Whilst in the stop mode, press the
MEMORY/FOLDER button to enter
the programming save mode.
2
Select a track by pressing the
or
button.
Selected track number
3
Press the MEMORY/FOLDER button to save the track num-
ber.
MEMORY/
FOLDER
MEMORY
MEMORY
MEMORY
MEMORY
MEMORY
4
Repeat steps 2 - 3 for other tracks and programmed
number will automatic increase. Up to 32 tracks can be
programmed.
"FUL" indicator will be display after programmed up to 32
tracks.
If you make a mistake, the programmed tracks can be cleared
by pressing the STOP button.
5
Press the / button to start playback.