EN-8
CHAPTER -2: SAFETY INFORMATION AND RECOMMENDATIONS
Recommendations
• For energy and water saving, remove coarse residues on your dishes before
placing the dishes into the machine. Start your machine after having fully
loaded it.
• Use the pre-wash programme only whenever necessary.
• Place such hollow items as bowls, glasses and pots into the machine in such
a way so they face down.
• You are recommended not to load into your machine any dishes different or
more than indicated.
Items not suitable for dish washing:
• Cigarette ashes, candle wax, polish, paint, chemical substances, iron-alloy
materials;
• Forks, spoons and knives with wooden,bone, ivory or nacre-coated handles;
glued items,items soiled with abrasive, acidic or base chemicals.
• Plastic items that are not heat-resistant, copper or tin-coated containers.
• Aluminium and silver objects (they may discolour, become dull).
• Certain delicate glass types, porcelains with ornamental printed patterns
as they fade even after the first wash; certain crystal items as they lose their
transparency over time, adhered cutlery that is not heat-resistant, lead crystal
glasses, cutting boards, items manufactured with synthetic fibres;
• Absorbent items such as sponges or kitchen rags are not suitable for
dishwashing.
Warning:
Make sure to purchase dishwasher-safe sets in your future
purchases.
INSTALLING THE MACHINE
Positioning the machine
When determining the installation place, ensure an accessible place for easy
loading and unloading of dishes.
Do not put your machine in any location where there is a probability of the
room temperature falling below 0°C.
Before positioning, take the machine out of its packaging by following the
warnings located on the packaging.
Position the machine close to a water tap or drain. You need to site your
machine, taking into consideration that its connections cannot be altered
once they are made.
Do not grip the machine by its door or panel in order to move it.
Take care to leave sufficient clearance from all sides of the machine to
comfortably move it back and forth during cleaning. Make sure that the water
inlet and outlet hoses do not get squeezed while positioning the machine.
Also, make sure that the machine does not stand on the electrical cable.
Adjust the machine’s adjustable feet so that it can stand level and balanced.
The proper positioning of the machine ensures problem-free opening and
closing of the door.
Summary of Contents for QW-GC13F472W-DE
Page 2: ......
