EN - 16
7. THE CONTROL PANEL
1
2
3
4
5
10
6
7
9
8
Press the Power On/Off button (
1
), the
Start/Pause light (
7
) will illuminate.
Select the programme most suitable for
your dishes using the Programme Selection
button (
6
).
Additional functions (
2, 3, 4, 5
) can also be
selected.
NOTE:
Press the Extra Fast / Silent
button (
2
) once to activate the Extra Fast
function. The duration of the selected
programme will reduce, providing more
economical water usage. Pressing twice
will activate the Extra Silent function
which provides a more sensitive and silent
washing operation.
NOTE:
Press the Energy Save
button (
3
)
to
decrease the temperature
of a programme. The door will also open
automatically at the end of the programme.
NOTE:
Press the Tablet Detergent
button (
4
) when using a combined
detergent that contains salt, rinse aid or
other extras.
NOTE:
Press the Half Load button
(
5
) to select the area of the dishwasher
containing dishes to be washed. You can
select both baskets, the upper basket
only, or the lower basket only. Press the
button until the light corresponding to the
basket contaning the dishes to be washed
illuminates. Dishes placed in other areas
will not be washed.
NOTE:
If an extra feature has been
used on the most recent wash programme,
this feature will remain active on the next
selected programme. If you do not want to
use this feature on the newly selected wash
programme, press the feature button until
the light on the button switches off.
Press the Start/Pause button (
7
) to start
the selected programme. The light on the
Start/Pause button will switch off and the
Wash light (
9
)
will illuminate. If the door of
your machine is opened while a programme
is operating, the Start/Pause light (
7
) will
flash.
The Wash, Rinse, Dry and End lights (
9
) on
the Control Panel indicate the status of the
programme in operation. The machine will
remain silent for 40 to 50 minutes while the
Drying light is on.
The Remaining Time Indicator (
10
) displays
the programme durations and the time
remaining of the programme in operation.
NOTE:
Simultaneously press the “+”
and “-” buttons for 3 seconds to activate/
deactivate the Child Lock. When it is first
activated, “CL” will show on the Remaining
Time Indicator for 2 seconds. When it is
deactivated, “CL” will flash once.
NOTE:
When there is insufficient
softening salt, the Salt Lack Warning
Indicator (
8
) will illuminate to indicate the
salt chamber needs filling.
NOTE:
When there is insufficient rinse
aid, the Rinse Aid Lack Warning Indicator
(
8
) will illuminate to indicate the rinse aid
chamber needs filling.
Delaying a Programme
Press the “+” and “-” buttons on the
Remaining Time Indicator to adjust
the programme delay time before the
programme starts. To change the delay
time, first press the Start/Pause button, then
use the “+” and “-” buttons to select a new
delay time. To activate the new delay time,
press the Start/Pause button.
4.2. Changing a Programme
Follow the steps below to change a
programme while in operation.
