EN -
20
Indicator’
(9)
will turn on. This indicator will
remain active until the salt has been refilled.
NOTE
: When the rinse aid needs to be
refilled, the ‘Rinse Aid Indicator’
(9)
will turn
on. This indicator will remain active until the
rinse aid has been refilled.
7.1. Changing a programme
When you want to change the wash
programme after another programme has
already started:
Press the Start/Pause button.
After the programme stops, select
your desired programme via the
programme selection button.
Start the new programme by
pressing the Start/Pause button.
The new programme will resume the
course of the old programme.
7.2. Cancelling a programme
When you want to cancel and stop a wash
programme after another programme has
already started:
Press the Start/Pause
button for 3 seconds.
During cancellation, the End light blinks.
The machine discharges the water
inside it for about 30 seconds.
When the End light turns on, the
programme has been cancelled.
7.3.
Switching the Machine Off
Pull the plug out of the outlet.
Turn off the water tap.
Switch your machine off with the On/
Off button after the programme has
ended and the End light turns on.