8
1. SEQUENCE COOKING
This function allows you to cook using up to 2 diff erent stages which can include manual cooking times or time
defrost as well as a weight defrost function. Once programmed there is no need to interfere with the cooking
operation as the oven will automatically move onto the next stage. An audible signal will sound once after the
fi rst stage. If the defrost function is needed within sequence cooking
,
please note that this should always be
the fi rst stage of sequence cooking.
NOTE:
AUTO MENU
cannot be set as one of the multiple sequences.
Example:
If you want to cook food for 20 minutes on P100 microwave power and then for 5 minutes with
P80 microwave power. The steps are as follows:
1.
Press the
MICRO. POWER
button, P100 will appear in the LED display.
2.
Press the
START/+30sec./ENTER
button once to confi rm the setting.
3.
Enter the cooking time by rotating the
ENTRY
dial until the display shows “20:00” minutes.
4.
Press the
MICRO. POWER
button, P100 will appear in the LED display.
5.
Press the
MICRO. POWER
button twice or rotate the
ENTRY
dial to select the microwave power to P80.
6.
Press the
START/+30sec./ENTER
button once more to confi rm the setting.
7.
Enter the cooking time by rotating the
ENTRY
dial until the display shows “5:00” minutes.
8.
Press the
START/ +30sec./ENTER
button to start cooking.
Direct start
You can directly start cooking on P100 microwave power level for 30 seconds by pressing the
START/ +30sec./ENTER
button. The cooking process will start immediately and each time the button is pressed this will increase the
cooking time by 30 sec.
NOTE:
The cooking time may be extended to a maximum of 95 minutes.
3. CHILD LOCK:
Use to prevent unsupervised operation of the oven by children.
a.
To set the CHILD LOCK:
In the stand-by mode, press
STOP/CLEAR
button for 4 seconds. There will be a long beep denoting entering the
children-lock state and the
indicator will illuminate together with the current clock time. If the clock has
not been set the display status will be as f
oll
o
ws:
w:
llows:
b.
To cancel the CHILD LOCK:
In the stand-by mode, press
STOP/CLEAR
button for
4
seconds. There will be a long "beep" denoting that the lock
is released.
2. +30sec FUNCTION / Direct tart
S
OTHER CONVENIENT FUNCTIONS