2
OVEN AND ACCESSORIES
ACCESSORIES:
Check to make sure the following accessories
are supplied:
13
Turntable
14
Turntable support
15
Low Rack
16
High Rack
17
Square shelves (x2)
• Place the turntable support into the coupling in the centre of
the oven floor, ensuring you place it TOP side up, (TOP is
engraved on one side). It should be able to freely rotate
around the coupling.
• Place the turntable on to the turntable support.
• Place the high/low racks onto the turntable if necessary.
• When using the square shelves, place them onto the shelf
runners as shown in Fig. A. Ensure the shelf locator is on the
right side.
NOTES:
• Always operate the oven with the turntable and support fitted
correctly. This promotes thorough even cooking. A badly fitted
turntable may rattle, may not rotate properly and damage the
oven.
• The turntable rotates clockwise or counter clockwise. The
rotary direction may change each time you start the oven.
This does not affect cooking performance.
• When you order accessories, please mention two details:
part name and model name to your dealer or SHARP
authorised service facility.
13
14
For use see
page 29.
1
Grill heating
element
2
Oven lamp
3
Control panel
4
Shelf runners
5
Waveguide cover
6
Oven cavity
7
Coupling
8
Door seals and
sealing surfaces
9
Door opening
handle
10
Air-vent openings
11
Outer cabinet
12
Power cord
2
4
1
8
9
6
5
7
16
15
17
3
12
11
Coupling
Shelf locator
Square shelf
Fig. A
10
Use for
convection
only. See
pages 11
and 29.
R-953/963M O/M 16/03/2000 10:49 Page 2