6
7
www.sharkclean.eu/uk
Freephone: 0800 862 0453
THE CARPET GLIDER
1
The Carpet Glider can be used with the All-Purpose
Head to lightly steam your carpet and area rugs. Just
place the mop head with the cleaning pocket attached
into the glider. The recommended steam setting is
HIGH when using the Carpet Glider.
(fig. 11)
2
Move the Steam Mop back and forth across a
section of the carpet.
(fig. 12)
ste
am
con
tro
l
Using Your Steam Mop - cont’d
3
Press the
STEAM CONTROL
button once to activate
the
LOW
steam setting.
Press the
STEAM CONTROL
button twice to
activate the
HIGH
steam setting.
(fig. 8)
Use the scrubbing side of the cleaning pockets when
using the
HIGH
steam setting.
4
Clean your floors with a forward and backward
motion.
(fig. 9)
To stop the steam, press the
STEAM CONTROL
button a third time.
The
STEAM CONTROL
button will flash blue to
indicate the mop is in
STANDBY
mode.
fig. 8
fig. 9
5
When one side of the cleaning pocket gets dirty,
just flip the mop and you can quickly start using
the other side. Use the shaggy side of the cleaning
pockets to lift up and lock away all the dirt and
debris and the scrubbing side to break up the
tough stain.
(fig. 10)
6
When the water tank is empty, the steam mop will
stop producing steam. You can refill the water tank
at any time as long as the mop is unplugged from the
outlet. Reference the filling instructions from page 4.
NOTE:
Please wait 2-3 minutes for the Steam Mop
to cool off before removing the mop head or the
cleaning pocket. Never leave the steam mop with a
damp/wet cleaning pocket on any floor.
fig. 10
Using Your Carpet Glider
fig. 11
The Steam Mop will not clean your
carpeting or area rugs. However, it is
great for grooming and freshening.
fig. 12
