11
12
0800 862 0453
www.sharkclean.eu
USING THE WINDOW SQUEEGEE
Cleaning Tip: To use the window squeegee, work with
the vapor jet down using top to bottom movements. To
do this without leaving streaks, use lateral movements
from the top to the bottom of the surface.
CAUTION:
Always avoid any sudden changes
in temperature to prevent breakage of cracks in
windows.
1
Attach the Window Squeegee by snapping into the
handle of the Accessory Hose until it clicks into
place.
(fig. 14)
2
Press the power button to start steaming.
3
To remove the Window Squeegee, press and hold
down the Accessory release button. Then slide out
the Window Squeegee.
CAUTION:
Turn the unit off before attaching or
removing the Window Squeegee.
Using Your Removable Handheld Steamer
with the Different Accessories - cont.
fig. 12
USING THE CONCENTRATOR NOZZLE
Cleaning Tip: The Concentrator Nozzle creates direct
steam spray to clean and sanitise hard to reach nooks &
crannies and other places where germs may build up. Use
the Concentrator Nozzle to loosen and dislodge compact
dirt often found in corner and tight places where traditional
methods and cleaning tools tend to push dirt into, making
it tough to reach and clean. Spray direct steam and wipe
clean with a wet cloth or paper towel.
1
Attach the Concentrator Nozzle by pressing the
nozzle onto the Accessory Hose until it clicks into
place.
(fig. 12)
2
Press the power button to start the steamer.
For effective cleaning, hold the steam output nozzle
1-2 inches away from the surface you’re cleaning.
CAUTION:
Do not press the power button until the
Concentrator Nozzle is snapped into the accessory
hose of your Handheld Steamer.
3
To remove the Concentrator Nozzle, press and hold
the accessory release button, then pull it out of the
Accessory Hose.
CAUTION:
Do not press the power button while
removing the Concentrator Nozzle. Avoid touching
the tip of the Concentrator Nozzle, as this will be very
hot after steaming.
NOTE:
The Handheld Steamer may continue to emit
steam for a few seconds after the power button is
pressed to turn the unit off. This is normal, and the
steaming will eventually come to a stop.
fig. 14
AFTER USE AND STORAGE
1
Press the power button to turn the unit off. Unplug
the cord from the outlet and place the mop into the
upright position. Let the unit cool for 2-3 minutes.
2
When you have finished using the Handheld Steamer,
reattach the handle to the handheld steamer.
3
Remove the cleaning pad from the mop head by
placing one foot on the tab of the all-purpose carpet
pad and lifting the Shark
®
Multi-Function Steam Mop
Lite, avoiding bare skin contact with the hot pad or dirt.
4
Empty the water tank before storage. Remove the
water tank cap and empty the tank over a sink.
Replace the water cap.
5
To store the Shark
®
Multi-Function Steam Mop Lite
hanging up, first remove the head (after it has cooled
and the steam has been released) then hang on a
large hook.
(fig. 15)
Care of Your Steam Mop
fig. 15
USING THE GROUT SCRUBBER
Cleaning Tip: The Grout Scrubber is designed for
removing stubborn messes in hard-to-reach nooks,
corners and in grout where focused scrubbing power
may be needed. It can loosen and dislodge compact dirt
often found in corners and tight places where traditional
methods and cleaning tools tend to push dirt into,
making it difficult to reach and clean. Scrub with the
Grout Scrubber and wipe clean with a cleaning cloth.
1
Attach the Grout Scrubber by snapping into the
handle of the Accessory Hose until it clicks into
place.
(fig. 13)
2
Press the power button to start steaming.
3
To remove the Grout Scrubber, press and hold down
the Accessory release button. Then slide out the tool
out.
CAUTION:
Turn the unit off before attaching or
removing the Grout Scrubber
.
fig. 13
Summary of Contents for S7000UK
Page 1: ...S7000UK OWNER S GUIDE ...
