F
S
V
I
N
P
E
E
E-12
SD-AS10W_EX_E.fm
05/3/18
ENGLISH
TINSZA124AWZZ
SD-AS10W
Pr
epara
tion f
o
r Us
e
- M
a
in unit pr
e
p
a
ra
tion -
Main unit preparation
Make sure to unplug the AC power lead before installing the main unit or change the position.
Position B
Position C
Main unit
stand
Make all connections
before attaching the
stand (see pages
14, 16).
Button name label
Non-slip sheet for main unit
Remote
sensor
Select from three installation methods according to the location.
For position A or B, make sure to use the included main unit stand. Otherwise the unit may fall.
The display direction changes according to the installation direction.
Position A
1
Remove the 2 screws.
1
Remove the 2 screws.
Main unit
stand
2
Secure the stand with the removed screws.
2
Secure the stand with the removed screws.
1
Align the position with the remote sensor
and attach the included button name label.
2
Fit the non-slip sheets into the groove.
YES
Correct
NO
YES
Correct
NO
Notes:
!
When attaching the stand, place the main unit on a cushion or soft cloth to avoid
damage.
!
Use the removed screws to secure the stand. Otherwise, the unit may break.
!
Remove the only specified screws. Otherwise malfunction may occur. Be careful
not to lose the removed screws.
!
Attach the button name label carefully. It is difficult to peel off.
Caution:
!
Do not change the installation direction when the main unit is turned on. Discs may
not be read or may be damaged.
!
To turn on the power after the first installation or after changing the installation
method, use the ON/STAND-BY button on the main unit. From the next time, you
can also use the remote control.