F
S
V
I
N
P
E
E
E-42
SD-AS10W_EX_E.fm
05/3/18
ENGLISH
TINSZA124AWZZ
SD-AS10W
Ad
v
a
nced
F
e
atures
- Cha
n
ging the
de
fa
ult s
e
ttings
of the
a
m
pli
fie
r -
Changing the default settings of the amplifier
Change settings according to the connected speakers.
Speaker delay setting (See page 43.)
Speaker level setting (See page 44.)
Test tone (See page 44.)
Example:
If the right surround speaker is 3.3 m (10 feet) away from the listening position,
change settings as shown below (adjust the SR).
Note:
The subwoofer setting applies to a subwoofer connected to SUBWOOFER PREOUT.
Installation image (with optional accessories):
Front
speaker
(right)
Surround
speaker
(right)
Surround
speaker
(left)
Subwoofer
Front
speaker
(left)
Centre speaker
1
In "Speaker delay setting", set the right surround speaker (SR) to 3.3 m (10 feet).
2
In "Speaker level setting", slightly increase the level of the right surround speaker
as it is a little farther than others (see page 44).
3
In "Test tone", check the sound from each speaker (see page 44).
FL
FR
SL
Default setting: 2 m (6 feet)
SR
SW
CT
FL
FR
SL
SR
SW
CT
3.3 m
(10 feet)