E-16
SD-AT1000W_LAG_E2.fm
04/7/21
SD-AT1000W
ENGLISH
TINSZA121AWZZ
2
3
4
5
6
7
8
1
Pr
epara
tion f
o
r Us
e
- Re
mot
e
c
ontr
o
l -
Remote control
"
Battery installation
Precautions for battery use:
!
Replace all old batteries with new ones at the same time.
!
Do not mix old and new batteries.
!
Remove the batteries if the unit is not to be used for long periods of time. This will
prevent potential damage due to battery leakage.
Caution:
!
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
!
Installing the batteries incorrectly may cause the unit to malfunction.
Notes concerning use:
!
Replace the batteries if the operating distance is reduced or if the operation
becomes erratic. Purchase 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).
!
Periodically clean the transmitter on the remote control and the sensor on the unit
with a soft cloth.
!
Exposing the sensor on the unit to strong light may interfere with operation.
Change the lighting or the direction of the unit.
!
Keep the remote control away from moisture, heat, shock, and vibrations.
"
Test of the remote control
Check the remote control after checking all the connections (see pages 9 - 13).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy your
system.
1 Open the battery cover.
2 Insert the batteries according to the direction indicated in the bat-
tery compartment.
When inserting or removing the batteries, push them towards the battery termi-
nals.
3 Close the cover.
0.2 m - 6 m
(8" - 20')
Remote sensor
